Bedienungsanleitung BYD Han 2023 (Seite 41 von 222) (Englisch)

810322

Zoom out

Zoom in

Vorherige Seite

1/222

Nächste Seite

•If the warning light flashes when the

Start/Stop button is pressed, it indicates

low battery of the key.

•If the key is not in the vehicle, the

instrument cluster prompts "No key

detected, please check whether the key

is in the car".

ABS fault warning light

•When the ignition switch is on OK, this

warning light goes on. If the ABS is

working properly, the light goes off in a

few seconds. Thereafter, if the system

fails, the light lights up again until the

fault is cleared.

•When the ABS fault warning light

lights up (with the parking system

fault warning light off), the anti-lock

braking system does not operate, but

the braking system will still function

properly.

•When the ABS fault warning light is on

(with the parking system fault warning

light off), since the anti-lock braking

system does not operate, the wheels will

be locked in case of emergency braking

or braking on a slippery road.

•If any of the following cases occurs,

it means that there are faults in

the components monitored by the

warning light system. In such case,

it is recommended to contact a BYD

authorized dealer or service provider for

vehicle inspection as soon as possible.

•When the ignition switch is on OK,

this warning light does not go on or

is steady on.

•This warning light goes on during

driving.

REMINDER

•A warning light that lights up briefly

during operation does not indicate

that there is a problem.

REMINDER

•If the parking brake system warning

light and the ABS warnings light

up at the same time, immediately

stop the vehicle safely and contact

a BYD authorized dealer or service

provider. In this case, when the

brake is applied, not only will the

anti-lock braking system fail to

work, but the car will also become

extremely unstable.

•If both ABS indicator and the braking

system indicator are on and the

electronic parking brake (EPB) is fully

released, the braking force distribution

system of front and rear wheels has also

failed.

Tire pressure fault warning light

•When the ignition switch is on OK, this

warning light goes on. It goes off in a few

seconds if the tire pressure monitoring

system is working properly. If the system

fails, this warning light goes on again.

•When the tire pressure fault warning

light lights up or flashes, the information

display on the instrument cluster

reads "Please check the tire pressure

monitoring system" and the tire

pressure is displayed as "---" on the

screen, it indicates that the tire pressure

system is faulty.

•When the tire pressure value displays

"Abnormal Signal", it indicates that the

tire pressure signal at the location of

the vehicle may be disturbed or the

tire pressure monitoring module is

damaged.

•When the tire pressure fault warning

light flashes rapidly, and one or more

values turn red in the tire pressure page

on the instrument cluster information

display, the corresponding tire is leaking

rapidly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BYD Han 2023 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BYD Han 2023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info