Bedienungsanleitung Byron MP001 (Seite 2 von 2) (Englisch)

558665

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Installation Guide:

Portable Door Chime: MP001/HB702

Power: 3 x ‘AA’/LR6 1.5V Batteries

(Not supplied)

Range: 100 Metres

Indoor Use Only

Bell Push: MPT

Power: 1 x 23A 12V DC Battery

(Included)

IP44 Weather Resistant

Specification

Range Guide

433.92MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

FIN

IRL

EST

SLO

Project Manager

Mr G Hunter

GB: CH Byron

Byron House, Sherwood Rd

Astonfields, Bromsgrove

B60 3DR

support@chbyron.com

9-5 Mon-Fri, Local call charges apply

V1.0

Tel: 0845 2301231 (UK)

www.chbyron.com

Avoid locating the Bell Push/Chime on or directly

near metallic surfaces as this may reduce the

operation range.

UPVC Door Frames:

When locating the bell push onto a UPVC door,

always check the operating performance before final

installation, internal metal frame may affect

performance.

Tip: Try adjusting the location of the Bell Push to the Left/Right

or place on external wall.

Installation Guide: Bell Push

Installation Guide: Chime

Place the door Chime within the operating range,

transmission of the wire free signal through

Walls, Doors and Ceilings etc, may reduce the operating

range. Chime unit for INDOOR use only.

Diagram for illustration purposes only

‘CLICK’

1: Using back plate as a

template.

2: Making sure UP arrow

points UP.

2: Mark and drill holes.

3: Insert wall plugs and attach

to wall using screws

provided.

4: Clip the Bell Push on to the

back plate making sure the

Bell Push ‘Clicks’ in to

place.

Tip: The Bell Push can be

installed using a suitable

double sided adhesive tab or

tape when drilling is not

sutiable.

User Hints:

In case of the door chime does not sound, please check the

followings:

a) Flat batteries in either Push Button or Door Chime.

b) Wrong battery polarity in either Push Button or Door Chime.

c) For Plug-in Door Chimes make sure the socket is switched on.

d) Bell Push and Door Chime are not paired together, see setup

guide.

e) Materials in between the Bell Push & Chime will reduce the

operating range, move the Door Chime closer to the Bell Push

f) Wire free devices can be affected by external sources e.g. wire

free home alarms or power transformers/adapter

Chime Unit

1: Remove old Batteries.

2: Insert new batteries, 3 X 1.5V

size ‘AA’.

3: Make sure ‘+/-’ match the

internal markings.

4: Test Chime Kit.

Changing Batteries:

Bell Push:

1: Remove back plate from the

Bell Push.

2: Remove old battery

3: Replace with new ‘23A’ 12V

battery.

4: Insert into holder making sure

‘+/-’ match the internal

marking

5: Test Chime Kit.

Always dispose of old batteries in an

environmentally friendly way.

Type R2 Device - device where the sound output is created by the initial

operation of the control and where the period of sound output continues

for the designed duration irrespective of condition of the control.

IMPORTANT:

There are no serviceable parts, do not repair.

The appliance is not to be used by children or persons with

reduced physical, sensory or mental capabilities, or lack of experience and knowledge,unless they have been

given supervision or instruction. Children should be supervised to ensure that they do not play with the

appliance.

Address Code:

The MP3 Door Chime, comes preset to a default address code, this

code may need to be changed if the chime rings due to a

neighbouring door chime or similar wire free product.

1: Select a new address code in the bell

push, by randomly moving the white

dip-switch’s.

2: Copy the new address onto the

chimes dip-switch’s. Located in the

battery compartment of the chime.

3: Test the chime kit by pressing the

bell push.

1 65432

ON Dip

1 65432

ON Dip

e.g.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Byron MP001 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info