Bedienungsanleitung Cadac Safari Chef 30 - 6540L1 (Seite 10 von 146) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

819979

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

8. Maintenance & troubleshooting

Maintenance

• If you clean and maintain your appliance on a regular basis, the life of your appliance will extend and the possibility of problems will

decrease.

• We recommend the service of your appliance to be every twelve (12) months by a service agent to ensure continued eﬃcient operation.

• This appliance must only be serviced by an authorized person.

• Check your gas hose and connections regularly for any signs of leaks and every time the gas cylinder is re-ﬁlled or ﬁtted to the appliance

with every use.

Troubleshooting

In the case of a spattering ﬂame or jet blockage:

• Clean your burner ports in case of an over spill.

• We recommend to clean or replace the jets every six (6) months to ensure continued eﬃcient operation of your appliance.

• Should the appliance operate abnormally aer

storage and all checks have not isolated the

problem, the jet may be blocked. A blocked

jet would be indicated by a weaker yellowish ﬂame

or no ﬂame at all in extreme cases. Under these

circumstances it will be necessary to

remove and check and thoroughly clean out any

foreign matter which may have gathered in the

appliance.

• This may be done by removing the jet using standard

tools and blow any dirt from the jet, alternatively, you

may purchase new jets from your

local store. Do not attempt to clean the jet

mechanically.

Replacing a Blocked Jet:

• Your appliance is ﬁtted with a speciﬁc size jet to

regulate the correct amount of gas.

• Should the hole in the jet become blocked, this

may result in a small ﬂame or no ﬂame at all. Do not

attempt to clean the jet with a pin or

other such device as this may damage the oriﬁce,

which could make the appliance unsafe.

• To replace the jet: Remove the fat pan (Fig. 7).

Gently unscrew the burner assembly (Fig. 8).

Remove the three screws from the heat shield plate

and remove the heat shield(Fig. 9), taking care not

to damage the piezo electrode. The jet can now

be removed using a suitable spanner (Fig. 10). Do

not use pliers on the jet as this may damage the jet,

making it unusable or impossible to remove. Screw

the new jet into the valve. Do not over-tighten as this

may damage the jet.

• Reverse the above procedure to re-assemble the unit.

Replacing the Hose:

• The ﬁtting of a hose is described in Section 3.

Fig. 7 Fig. 8

Fig. 10

Jet

Fig. 9

Pack into the zipper compartments

located within the lid ﬂap of the carry

bag.

Packing back into the carry bag

• Aer use, allow your appliance to cool and fold legs of the base unit back as per instructions

described above.

• Starting with the base unit ﬁrst, pack the appliance into the carry bag following the number order.

• Pack the BBQ Grid and the Flat Grid into the zipper compartments located within the lid ﬂap of the

carry bag.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadac Safari Chef 30 - 6540L1 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info