Bedienungsanleitung Cadel ARCO 7 T1 BI-FLUX (Seite 18 von 36) (Englisch)

815120

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

LUCE - ELLE - ARCO

The next step proposes a shutdown time of 10 minutes above that set for start-up: press the + key and adjust the shutdown time,

confirm with the “menu” key.

Subsequently the system proposes the days of the week in which to activate or deactivate the previously set timer. With the - or +

key highlight with the white background the day in which one wishes to activate the timer and confirm with the “menu” key. If no

day of the week is confirmed as active, in turn the timer programme will not appear active in the status screen.

Continue to program the following days or press “ESC” to exit. Repeat the procedure to program the other timers.

8.12 PROGRAMMING EXAMPLES:

P1 P2

on off day on off day

08:00 12:00 mon 11:00 14:00 mon

Boiler on from 08:00 to 14:00

on off day on off day

08:00 11:00 mon 11:00 14:00 mon

Boiler on from 08:00 to 14:00

on off day on off day

17:00 24:00 mon 00:00 06:00 tue

Boiler on from 17:00 on monday to 06:00 on tuesday

8.13 NOTES FOR TIMER OPERATION

• Start-up with the timer always takes place with the last temperature and ventilation settings (or with default 20°C and V3

settings in the event they have never been changed).

• It is possible to set the shutdown time from “ignition time + 10 minutes” up to 23:50. If 24:00 is set as shutdown time, the stove

will not switch off (use this shutdown time, for example, when the next day is programmed to continue from 00:00).

• If the shutdown time is not already memorised, it proposes a start-up time in + 10 minutes.

• A timer programme switches the boiler off at 24:00 of one day and another programme switches it on at 00:00 of the next day:

the boiler stays on.

• A programme proposes a start-up and shutdown in times included within another timer programme: if the boiler is already on,

start will not have any effect, while OFF will switch it off.

• In the boiler on and timer active condition, press the OFF key and the boiler will switch off, it will switch on automatically at

the next time set on the timer.

• In the boiler off and timer active condition, press the ON key and the boiler will switch on, it will switch off at the time set on

the active timer.

8.14 AUTO ECO MODE SEE SECTION FG SETTINGS MENU A PAG. 13

To activate the “Auto-Eco” mode and adjust the time refer SETTINGS MENU a pag. 13.

The possibility to adjust the “ t Off Time Eco” comes from the need to ensure proper operation in the various rooms the boiler can

be installed in and prevent continuous shutdowns and start-ups in the event the temperature is subject to sudden changes (air

currents, poorly insulated rooms, etc.).

The ECO switch off procedure is automatically activated when the power recall device is activated (Room probe +1°C or external

thermostat with open contact, see Fig. 17). "t Off Time Eco" time decrease starts (5 minutes by default, see Fig. 18, and can be

modified from the "Settings" menu). During this phase the panel view is activated ON with the small flame and alternates chrono

(if ON) - active Eco.

Fig. 17 - Active eco 1 Fig. 18 - Active eco 2 Fig. 19 - Active eco 3

On the upper display the minutes for the Eco Stop countdown are shown. The flame goes to P1, where it remains until the set "t

Off Time Eco" time is over and, if conditions are still met, it switches to the switch-off process. The ECO switch-off countdown is

reset if one of the devices resumes recalling power.

When the switch-off procedure begins, the panel shows: Off - Active Eco - small flashing flame (see Fig. 19).

When the stove is switched off, the panel shows active OFF-ECO with the flame icon off.

For an ECO switch on, the following conditions must be met simultaneously:

• Room probe -1°C or external thermostat with closed contact (for at least 20" to avoid false recalls).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel ARCO 7 T1 BI-FLUX Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel ARCO 7 T1 BI-FLUX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info