Bedienungsanleitung Cadel CARINA (Seite 10 von 24) (Englisch)

643527

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

CARINA - DORA

LEGEND Fig. 8 page 9

1 ≥ 1,5 mt

2 ≥ 0,3 mt

3-3 Sectional view

4 Shield grid

5 Curve inlet to turn downwards

On all our stoves there is the possibility to draw the combustion air directly from outside. With this type of installation

the ventilation grid is no longer necessary, thus eliminating the ows of cold air that compromise the efciency

of the system.

• Use a pipe with minimum Ø80 mm pipe and a maximum length of 2 metres; to connect the pipe see the back

of the stove.

• During installation step is necessary to verify the minimum distances required for the combustible air inlet as

(for example) an open door or window causes a vortex which could remove the combustible air necessary

to the stove (see the underlying scheme).

• On the external wall it is necessary to install a curve at 90° to protect the combustible air inow from wind

effects: turn the curve inlet downwards, see Fig. 8 page 9.

• Endow the curve with an external shield grid against birds in such a way that it cannot be obstructed by any

object.

Check with your local authorities if exists any restrictive regulation regarding the combustible

air inlet: if present, they must be applied.

9.10 CHIMNEY FLUE CONNECTION

Your stove works through a natural draught. It is obligatory to check that all pipes are realized in compliance

with the following regulation on material selection: EN 1856-1, EN 1856-2 e UNI/TS 11278. All must be effected by

specialized personnel or companies as provided by UNI 10683:2012.

• The connection between the appliance and the chimney ue should be short in order to favor the draught

and to avoid condensation in the pipes.

• The fume conduit should be equivalent or longer than the outlet joint ones.

• Some stove models are endowed with a lateral and/or back exhaust. Check that the unused exhaust is

sealed with the plug given with standard equipment.

SYSTEM TYPE Ø150 mm PIPE Ø240 mm PIPE

Minimum vertical length 1,5 mt 2 mt

Maximum length (with 1 union) 6,5 mt 10 mt

Maximum length (with 3 unions) 4,5 mt 8 mt

Maximum number of unions 3 3

Level section (minimum inclination 3%) 2 mt 2 mt

Installation at a height above 1200 m a.s.l. NO Obligatory

• Use a specic plate pipe for stoves.

• It is forbidden to use metal, bre cement or aluminium exible pipes.

• For change of direction it is obligatory always to use a T-union (or a curve not with right angle) with inspection

plug which enables an easy periodic cleaning of the pipes.

• Please assure you that after the cleaning the inspection plugs are sealed with its efcient gasket.

• It is forbidden to connect more appliances to the same fume conduit.

• It is forbidden to convey in the same fume conduit exhausts from overhanging cooker hoods.

• It is forbidden to exhaust ue gases directly from the wall towards the outside and closed spaces also at open

top.

• It is forbidden to connect any other appliance (wood stoves, cooker hoods, boilers, etc...).

• The fume conduit must be placed at a distance of minimum 500 mm from ammable or heat-susceptible

components.

• The fume conduit must be connected with stove exhaust in a xed and tight manner, and if required with the

insertion of a damper (see ).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel CARINA Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel CARINA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info