Bedienungsanleitung Cadel DEMETRA (Seite 14 von 40) (Englisch)

643597

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

DEMETRA

INSTALLATION

10.1 INTRODUCTION

• The assembly position dipends on environment, exhaust, chimney ue.

• Check with local authorities if there are any restrictive regulations which regard the combustible air inlet,

room ventilation, fume exhaust system together with chimney ue and chimney pot.

• The manufacturer declines any responsibility in case of installation which are not in compliance with current

regulations, in case of a wrong room ventilation system, in case of an electric connection which is not in

compliance with regulations and in case of a wrong use of the appliance.

• Intallation, electric connection, operation test and maintenance must be carried out by an authorized and

skilled technician.

• Check if there is the combustible air inlet.

• Check the probable presence of other stoves or appliances which could depress the room (see EXTERNAL

AIR INLET page 9).

• Check at switched on stove if there is the presence of CO in the room.

• Check if the chimney has the necessary draught.

• Check if during the fume passage all has been executed in safety (probable fume losses and distances from

ammable materials, etc.…).

• The installation of the appliance must enable an easy access for appliance, fume exhaust pipes and chimney

ue cleaning.

• The installation must enable en easy access to the electric connection plug.

• It is forbidden to install the stove in bedrooms, bathrooms and in rooms used for storing combustible materials

and in one-room ats.

• In any case the stove must not be installed in rooms where it can get in touch with water or water splashes

because this can cause burn hazards and short-circuit.

• To install more appliances, the external air inlet must be correctly dimensioned (see EXTERNAL AIR INLET page

9).

• Only in room used as kitchen is possible to use appliances for cooking with its hood without steam extractor.

• Only type “C” appliances are allowed and not type “B”: make reference to regulations active in the country

where the appliance is installed.

10.2 DESCRIPTION OF THE RANGE DEMETRA

Heavyweight steel range, in conformity with standard UNI 9026 and UNI EN 10111.

The circulation of fumes is designed to maximise exploitation of the caloric potential of the wood.

COMPONENTS (see Fig. 12 page 15):

1 - Handrail

2 - Cast iron grills

3 - Concentric rings for cooking in direct con tact with the re

4 - Cast iron hot plate

5 - Selector for “Lighting-up - Heating/Cooking”

6 - Boiler thermometer

7 - Thermostatic adjustment: adjusts the inlet of combustion air (primary and secondary air), increasing or

decreasing the rate of combustion.

8 - Fume outlet ring

9 - Range body

10 - Oven

11 - Cleaning hatch

12 - Oven thermometer

13 - Cinder box

14 - Grill raising adjustment access

15 - Front loading door

16 - Circulation device thermostat

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel DEMETRA Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel DEMETRA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info