Bedienungsanleitung Cadel GRACE3 - 2019 (Seite 23 von 35) (Englisch)

696348

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

GRACE

- SPIRIT

- MADISON - TABLA - ROXY - ATRIUM

5.11 ELECTRIC CONNECTION

Warning: the appliance must be installed by an authorized technician!

• The electric connection occurs through a cable with plug put in an electric socket which is able to support charge and tension

specific of every model, as described in the technical datas table (see FEATURES a pag. 29).

• The plug must be easily accessible when the appliance is installed.

• Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not

efficient, please endow you with one in compliance with the law.

• Connect the supply cable first on the back of the stove (see Fig. 52 Fig. 53) and then at a wall electric socket.

Fig. 52 - Electric socket with master switch Fig. 53 - Plug connected

• Do not use extension cables.

• If the feeder cable is damaged, it must be replaced by an authorized technician.

• When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.

5.12 CONNECTION TO THE EXTERNAL THERMOSTAT SPIRIT

 GRACE



The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room

thermostat. This operation must be executed by an authorized technician.

Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat

(default setting OFF) as indicated below:

• Press the "menu" button.

• Scroll with the arrows to "Settings".

• Select by pressing "menu".

• Scroll with the arrows again to "Ext.Thermostat".

• Select by pressing "menu".

• Press the - + buttons.

• To activate the external thermostat select "on".

• Press the "menu" button to confirm.

5.13 CONNECTION TO THE EXTERNAL THERMOSTAT ATRIUM  ROXY  MADISON  TABLA

The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room

thermostat. This operation must be executed by an authorized technician.

Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat

(default setting OFF) as indicated below:

• Press the “MENU” key for a few seconds (1).

• Repeatedly press the P2 key until "M8-Technical Calibrations" appears.

• Select by pressing the P3 key.

• Set the password with keys P1 or P2 (keeping the key pressed accelerates the setting).

• Confirm by pressing the P3 key.

• Press the P1 or P2 keys until “M8-2 Various Calibrations” appears.

• Confirm with P3.

• Scroll with the P3 key up to: Pr46 “Enable remote”.

• Press the P1 or P2 key to modify the status.

• Confirm with the P3 key.

• Scroll with the P1 or P2 key up to “M9-Output”.

• Confirm with P3 key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel GRACE3 - 2019 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel GRACE3 - 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info