Bedienungsanleitung Cadel HUBLOT (Seite 6 von 32) (Englisch)

814932

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

HUBLOT - FLOS - MAGRITTE

3 CAUTIONS  WARRANTY CONDITIONS

3.1 INFORMATION

• Please contact the retailer or qualified personnel for any information, problem or malfunction.

• Only use the fuel specified by the manufacturer.

• When the product is switched on for the first time, it is normal for it to emit smoke due to the paint heating up for the first time.

Therefore make sure the room it is installed in is well-ventilated.

• Periodically check and empty the inspectionable parts of the smoke duct (e.g. Tee fitting caps)

• Have the smoke outlet system periodically checked and cleaned

• The product is not a cooking appliance.

• Always keep the cover of the fuel hopper closed.

• Store this installation and user manual with care as it must accompany the product for the duration of its useful life. If the

product is sold or transferred to another user, always ensure the manual is also handed over.

3.2 INTENDED USE

The product only works with wood pellets and must be installed inside a room.

3.3 PRODUCT PERFORMANCE CHECKS.

All our products undergo ITT TESTS carried out by a notified third party laboratory (system 3) and in accordance with Regulation

(EU) number 305/2011 “Construction products”, according to standard EN 14785:2006 for household appliances and “Machinery

Directive” EN 303-5 for boilers.

In the case of tests for any market surveillance or inspections by third parties, please consider the following warnings:

•

• To reach the declared performance levels, the product must perform an operating cycle of at least 6/8 hours beforehand.

• Set the average draught of the combustion fumes as specified in the “technical product features” table

• The type of pellets used must comply with the current EN ISO 17225-2 class A1 regulation. Fir pellets are usually used for

certification.

• The amount of thermal energy can vary according to the length and calorific value of the fuel. This may require some adjustments

(accessed from the user menu) to comply with the hourly consumption specified in the “technical product features” table.

Using class A1 pellets guarantees a calorific value that is likely to be close to that used in the product certification; the size of

the pellet grains can significantly affect hourly fuel loading and consequently performance; it is therefore suggested to use

pellets with a 6 mm diameter and an average length of around 24 mm (avoid pellets that are too long or excessively crushed).

• With wood-burning appliances, the fuel must comply with the current EN ISO 17225-5 class A1 regulation. Check the correct

moisture of the fuel, as it must be within the range of 12 - 20% (it is best if the moisture is close to 12%, as is normally used in

certification). As the fuel moisture increases, different combustion air settings are required, which are implemented from the

combustion air register, thereby modifying the mixture of primary and secondary air

• It is important to check the operation of devices that can affect performance (for example air fans or electric safety devices) in

case of damage due to handling.

• Nominal performance has been obtained by setting the maximum flame power and room ventilation in automatic mode.

3.4 WARRANTY CONDITIONS

The duration, conditions and limitations of CADEL S.r.l. can be found on the guarantee card enclosed with the device.

The company guarantees the product, with the exception of elements subject to normal wear listed below, for a period of

2 (two) years from the date of purchase attested by:

• a document to serve as proof of purchase (invoice and/or receipt) that shows the name of the vendor and the date on which

the purchase was made;

• forwarding of the completed certificate of guarantee within 8 days of purchase.

Furthermore, the product must be installed and started by specialised personnel who must, where provided, issue a declaration of

conformity of the plant and of the proper functioning of the product, for the warranty to be valid and effective.

We recommend testing the product before completion with the relative finishes (claddings, painting of walls, etc.).

Installations not meeting the current standards, improper use and lack of maintenance as expected by the manufacturer, void the

product warranty.

The guarantee is valid on the condition that the instructions and warnings contained in the use and maintenance manual are

observed, and therefore the product is used correctly.

The replacement of the entire system or the repair of one of its components does not extend the guarantee period, and the original

expiry date remains unchanged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel HUBLOT Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel HUBLOT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info