Bedienungsanleitung Cadel IDRO PRINCE 30 (Seite 44 von 72) (Englisch)

696857

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

IDRO PRINCE

12-16-23-23 H

O - IDRO PRINCE 30-30 H

O - AQUOS

16-23-23 H

O - IDRON 16-22 AIRTIGHT - MIRA 16-22 -

TESIS 16-23

AIRTIGHT - HIDROFIRE 22.8

11.2 NOTES FOR TIMER OPERATION

• Start-up with the timer always takes place with the last temperature and ventilation settings (or with default 20°C and V3

settings in the event they have never been changed).

• Start-up time ranges from 00:00 a 23:50

• If the shutdown time is not already memorised, it proposes a start-up time in + 10 minutes.

• A timer programme switches the boiler off at 24:00 of one day and another programme switches it on at 00:00 of the next day:

the boiler stays on.

• A programme proposes a start-up and shutdown in times included within another timer programme: if the boiler is already on,

start will not have any effect, while OFF will switch it off.

• In the boiler on and timer active condition, press the OFF key and the boiler will switch off, it will switch on automatically at

the next time set on the timer.

• In the boiler off and timer active condition, press the ON key and the boiler will switch on, it will switch off at the time set on

the active timer.

11.3 SLEEP FUNCTION MAIN MENU

The sleep function is activated only when the boiler is switched on and allows to quickly set a time at which the product must

switch off.

To set the Sleep function act as follows:

• Enter MENU

• Scroll to SLEEP with the <> arrows

• Press Menu

• With the + - keys adjust the desired shutdown time.

The panel proposes a shutdown time of 10 minutes from the current time, adjustable with key 4 until the next day (I can therefore

delay the shutdown for up to a maximum of 23 hours and 50 minutes).

If the SLEEP function is active with the TIMER active the first has priority over the latter, therefore the boiler will not switch off at

the time set on the timer but instead by the time established by the sleep function, even if later than the time set on the timer.

11.4 ADJUSTMENTS MENU

To access the adjustments menu act as follows:

• Press the + - keys

• Scroll with the <> arrows and select “Set Room T” or “Set Water T” or “Exchanger Speed”

• Press “menu” to access the selected option.

• Modify with the + - keys.

• Press “menu” to confirm and “esc” to exit.

11.5 SETTINGS MENU

The SETTINGS menu allows to act on the boiler operating mode:

A. Language.

B. Cleaning (displayed only when the boiler is switched off).

C. Feed screw loading (displayed only when the boiler is switched off).

D. Tones.

E. External thermostat (activation).

F. Auto Eco (activation).

G. Eco-Shutdown T (default 10 minutes).

H. Pump on T (default 50°C).

I. Auxiliary boiler (default deactivated).

J. Pellet recipe.

K. Smoke rpm % ventilation.

L. Maximum power (1-5 - default 5).

M. Components test (displayed only when the boiler is switched off)

N. “Chimney sweep” function (activated only when the boiler is switched on, for field emissions test).

O. System configuration.

P. Season.

Q. Technical menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel IDRO PRINCE 30 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel IDRO PRINCE 30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info