Bedienungsanleitung Cadel IDRO PRINCE3 23 (Seite 57 von 72) (Englisch)

696849

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

IDRO PRINCE

12-16-23-23 H

O - IDRO PRINCE 30-30 H

O - AQUOS

16-23-23 H

O - IDRON 16-22 AIRTIGHT - MIRA 16-22 -

TESIS 16-23

AIRTIGHT - HIDROFIRE 22.8

12.11 FAILED STARTUP

If during ignition no flame develops, the boiler will go into alarm condition.

12.12 ANTIFREEZE FUNCTION

If the probe in the boiler detects a water temperature of less than 5°C, the circulation pump is automatically activated to prevent

the system from freezing.

12.13 PUMP ANTISEIZURE FUNCTION

If the pump is not used for prolonged periods, it is activated periodically for a few seconds to prevent it from seizing up.

TAMPERING WITH THE SAFETY DEVICES IS PROHIBITED

If the product is NOT used as described in this instruction manual, the manufacturer declines all liability for

any damage caused to persons and property. The manufacturer furthermore refuses to accept responsibility

for damage to persons and property arising from the failure to observe all the rules contained in the manual

and in particular:

• All the necessary measures and/or precautions must be adopted when performing maintenance, cleaning

and repairs.

• Do not tamper with the safety devices.

• Do not remove the safety devices.

• Connect the product to an efficient smoke expulsion system.

• Verify that the room in which the appliance will be installed is adequately ventilated.

The product can be started-up and the automatic function of the probe restored only after having eliminated

the cause that triggered the safety system. This manual will help you understand which anomaly has occur-

red, and explain how to intervene according to the alarm message displayed on the appliance.

12.14 ALARM ALERTS

Whenever an operating condition other than that designed for the regular operation of the boiler occurs, there is an alarm condi-

tion.

The control panel gives information on the reason of the alarm in progress. A sound signal is not envisioned for alarms A01-A02

only so to PANEL ALERTnot disturb the user in the event of pellets running out in the hopper during the night.

PANEL ALERT TYPE OF PROBLEM SOLUTION

A01 The fire does not ignite.

Check whether the brazier is clean / level of pellets in

the hopper.

A02 The fire goes off abnormally. Check the level of pellets in the hopper.

A03 Thermostat

alarms

The temperature of the pellets hopper or the

water temperature exceed the envisioned

safety threshold.

Wait for the cooling stage to end, cancel the alarm and

restart the boiler setting the fuel loading at minimum

(SETTINGS menu - Pellets recipe). If the alarm persists,

contact the service centre. Check if the room fan works

properly (if present).

A04 Smoke overheating.

The set smoke threshold has been exceeded. Reduce

pellets loading (SETTINGS menu - Pellets recipe).

A05 Pressure

switches alarm

Smoke pressure switch intervention or water

pressure insufficient.

Verify chimney obstruction / door opening or hydraulic

system pressure.

A08 Abnormal smoke fan operation. If the alarm persists, contact the service centre.

A09 Smoke probe faulty. If the alarm persists, contact the service centre.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel IDRO PRINCE3 23 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel IDRO PRINCE3 23

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info