Bedienungsanleitung Cadel MIRA 22 T2 (Seite 19 von 36) (Englisch)

815222

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2

8.13 NOTES FOR TIMER OPERATION

• Start-up with the timer always takes place with the last temperature and ventilation settings (or with default 20°C and V3

settings in the event they have never been changed).

• It is possible to set the shutdown time from “ignition time + 10 minutes” up to 23:50. If 24:00 is set as shutdown time, the stove

will not switch off (use this shutdown time, for example, when the next day is programmed to continue from 00:00).

• If the shutdown time is not already memorised, it proposes a start-up time in + 10 minutes.

• A timer programme switches the boiler off at 24:00 of one day and another programme switches it on at 00:00 of the next day:

the boiler stays on.

• A programme proposes a start-up and shutdown in times included within another timer programme: if the boiler is already on,

start will not have any effect, while OFF will switch it off.

• In the boiler on and timer active condition, press the OFF key and the boiler will switch off, it will switch on automatically at

the next time set on the timer.

• In the boiler off and timer active condition, press the ON key and the boiler will switch on, it will switch off at the time set on

the active timer.

8.14 AUTO ECO MODE SEE SECTION FG

To activate the “Auto Eco” mode and adjust the time refer see section f-g.

The possibility to adjust the “ECO shutdown t” comes from the need to ensure proper operation in the various rooms the boiler

can be installed in and prevent continuous shutdowns and start-ups in the event the temperature is subject to sudden changes (air

currents, poorly insulated rooms, etc.).

The ECO shutdown procedure is activated automatically when all the power demand devices involved in the “system configu-

ration” are satisfied: room probe/external thermostat, flow switch, puffer thermostat/ntc (10 k ß3435) or boiler thermostat/

ntc (10 k ß3435). If all devices present are satisfied the “ECO shutdown t” time decrease starts (by default 10 minutes, it can

be changed within the “Settings menu”). During this stage the panel displays ON with a small flame and alternately Chrono (of

active) - Eco active. The minutes indicating the countdown for the Eco Stop are shown at the top of the display. The flame goes into

P1 and stays there until the programmed “Eco shutdown t” time has elapsed and if the conditions are still satisfied, it goes into the

shutdown stage. The ECO switch off countdown resets if one of the devices boosts power again.

When switch off starts the panel displays: Off - Eco Active - small flashing flame.

Once the boiler has reached the off condition, the panel displays OFF-ECO with the extinguished flame symbol.

To restart from ECO the following conditions must be satisfied simultaneously:

• Power demand

• After 5 minutes from the beginning of shutdown.

• TH2O < TSetH2O.

• If the domestic hot water (DHW) demands power - if envisaged - the first 5’ are ignored and the boiler restarts as needed.

NOTE: In configuration 4 - 5 the Auto Eco mode is enabled automatically. Even when one sets the “summer” function in configura-

tion 2 - 3 it is enabled automatically. In the cases where it is designed to be active, it is not possible to deactivate the mode.

8.15 SLEEP FUNCTION MAIN MENU

The sleep function is activated only when the boiler is switched on and allows to quickly set a time at which the product must

switch off.

To set the Sleep function act as follows:

• Enter MENU

• Scroll to SLEEP with the <> arrows

• Press Menu

• With the + - keys adjust the desired shutdown time.

The panel proposes a shutdown time of 10 minutes from the current time, adjustable with key 4 until the next day (I can therefore

delay the shutdown for up to a maximum of 23 hours and 50 minutes).

Fig. 12 - Sleep

If the SLEEP function is active with the TIMER active the first has priority over the latter, therefore the boiler will not switch off at

the time set on the timer but instead by the time established by the sleep function, even if later than the time set on the timer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel MIRA 22 T2 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel MIRA 22 T2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info