Bedienungsanleitung Cadel MODO AIRTIGHT (Seite 18 von 36) (Englisch)

814937

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

FRAME - MODO - QUASIMODO

If the stove is set to maximum heat output 5 and the fans to minimum output 1, this may cause overheating

and the “THERMAL SAFETY” alarm to go off.

Comfort Mode - In the air versions, it cannot be deactivated. At power 1 the fans are off.

In versions with ducting, the comfort mode allows you to automatically activate or deactivate all the fans at power 1.

If set in automatic (A), the comfort mode is active by default and disables, in addition to the room fan, also the ducting fans. To

reactivate them, simply set their adjustment other than automatic, e.g. 1,2,3,4,5.

Fire - this function allows setting the flame power from a minimum of 1 to a maximum of 5. The power levels correspond to a

different fuel consumption value: by setting 5 you can heat the room in less time, while by setting 1 you can keep the ambient

temperature constant for a longer period. The flame set goes to the minimum value automatically when the set temperature value

is reached.

If only one notch appears, the stove has a flame power equal to 1.

If 5 notches appear, the stove has a flame power equal to 5.

If the notches flash, automatic cleaning is under way.

Fig. 17 - Display Fig. 18 - Power levels

8.11 PROGRAMMED MODE TIMER  MAIN MENU

Setting the current day and time is essential for the proper operation of the timer.

There are six TIMER programmes, for each one the user can decide the start-up and shutdown time as well as the day of the week

in which it is active.

When one or more programmes are active, the panel alternately displays the boiler status and TIMER “n” whereby “n” is the number

relating to the activated timer programmes, separated from each other with a dash

Example:

• TIMER 1 Timer programme 1 active.

• TIMER 1-4 Timer programmes 1 and 4 active.

• TIMER 1-2-3-4-5-6 Timer programmes all active.

EXAMPLE OF PROGRAMMING

With boiler on or off:

• access the MENU,

• scroll to TIMER with the <> arrows,

• press the “Menu” key

• the system proposes “P1” (Press the <> keys for the subsequent timers P2,P3, P4, P5, P6)

• to activate “P1” press the “Menu” key

• press + - and select “ON”

• confirm with the “Menu” key

At this point it will propose 00:00 as starting time, with key + - adjust the starting time and press the “menu” key to confirm.

The next step proposes a shutdown time of 10 minutes above that set for start-up: press the + key and adjust the shutdown time,

confirm with the “menu” key.

Subsequently the system proposes the days of the week in which to activate or deactivate the previously set timer. With the - or +

key highlight with the white background the day in which one wishes to activate the timer and confirm with the “menu” key. If no

day of the week is confirmed as active, in turn the timer programme will not appear active in the status screen.

Continue to program the following days or press “ESC” to exit. Repeat the procedure to program the other timers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel MODO AIRTIGHT Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel MODO AIRTIGHT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info