Bedienungsanleitung Cadel Pretty (Seite 24 von 40) (Englisch)

643577

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

MIRIAM - MARY - PRETTY - VERVE - CRISTAL

Fig. 38 - LCD control display

LEGEND Fig. 38 page 24

1 Time

2 Power

3 State

4 Message

5 Temperature

12.3 USER MENU

By once pressing P3 key you can hace access to user parameter controlling. To let them slide press P5 and P6

keys. They are:

POS. REFERENCE DESCRIPTION

1 SET CLOCK

Set date and time. The board is provided with a lithium battery which enables a clock

autonomy of 3/5 years. See CLOCK SETTING page 26.

2 SET CHRONO

Press once P3: "CHRONO ENABLE" appears. Press P3 again and with P1 and P2 put in "OFF"

or "ON". For daily, week-end or weekly programming, see DAILY PROGRAMMING page 26.

CAUTION: do not active if STAND-BY function is active!

SELECT

LANGUAGE

Press once P3 key and with P1 and P2 keys select the desired language.

4 STAND-BY MODE

It activates a function which, if the set ambient temperature has been exceeded for more

then 10 minutes, start the switching off phase up. If the ambient temperature has fall at

more than 2°C, the stove will restart automatically up, starting from START UP page 24.

Press once P3 key and with P1 and P2 keys put in "OFF" or "ON". CAUTION: do not activate if

CHRONO function is active!

BUZZER MODE

(audio alarm)

Press once P3 key and with P1 and P2 keys put in "OFF" or "ON".

6 INITIAL LOAD

When the stove has its rst ignition, the auger is completely empty. If it should be necessary

do a precharge by pressing P3 key, then P1 key for starting up and P4 key for stop.

7 STOVE STATE

It shows all parameters connected to the stove state: this is a menu for the Authorized

Techinician

8 TECHNICA SETTING Only for the Authorized Technician.

9 FLAME SETTING It enables to set the ame dipending on the draught of the chimney ue.

12.4 START UP

We remind you that the rst ignition must be carried out by a specialized and authorixed technician who will

check that all is installed in compliance with current regulations and checks the efciency.

• If inside the combustion chamber there are booklets, manuals, etc..., remove them.

• Check if the door is correctly closed.

• Check if the stove is correctly inserted in the electric socket.

• Before switching the stove on, assure you the burning pot is clean.

• To start the stove up, keep pressed P4 key for an instant till it will be shown "START" and "PREHEAT WAIT": the

preheating of the ingnition resistance starts. After 2 minutes about, it will be shown "PELLET LOAD, WAITING FIRE",

in this phase the auger loads the pellet and the heating of the resistance continues. When the temperature is

sufciently high (after 7-10 minutes about), the ignition is considered as happened and on the display shows

"FIRE PRESENT".

• Completed the phase "FIRE PRESENT", the control unit enter the "WORK" phase showing the set caloric power

and ambient temperature. It is in this phase that P5 and P6 keys settle the stove power from 1 to 5. If the value

of the ambient temperature exceeds the limit set on the keyboard on the temperature setting, the caloric

power will be carried at the minimum showing "WORK, MODULAT". When the ambient temperature turns

back below the set temperatur, the stove turns back to the set power.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel Pretty Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel Pretty

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info