Bedienungsanleitung Cadel PRINCE 3 (Seite 27 von 48) (Englisch)

643758

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

VEGA - SIRE

PLUS - DOGE

PLUS - SFERA

- SFERA

PLUS - PRINCE

- PRINCE

PLUS - GLOBE - TREND - ELISE

PLUS

12.6 FAILED IGNITION

If the pellets do not burn, the failed ignition will be indicated by the alarm "FAILED IGNITION".

• If the room temperature is lower than 10°C, the plug is not able to bear the ignition stage. To support it please

insert some pellets in the burning pot and a piece of burning relighter igniter material on the pellets (for

example relighters cubes).

• Too much pellets in the burning pot, or humid pellet, or sooty burning pot make ignition difcult and create

dense white smoke which is harmful to health and can cause explosions on the combustion chamber. It is

therefore necessary not to stand in front of the stove during ignition stage if dense white smoke is present.

If after some months the ame appears weak and/or orange colored or the glass tends

to blackens and the burning pot to become encrusted, clean the stove, clean the fume

conduit and the chimney ue.

12.7 POWER FAILURE

• After a black-out lower than 5 seconds, the stove turns back to the power which was settled.

• After a black-out of more than 5 seconds, the stove enters the "COOLING WAIT" phase. Completed this

phase, it starts automatically up with the different phases (see START UP page 26).

12.8 TEMPERATURE SETTING

• To modify the ambient temperature it is sufcient to press P1 and P2 keys according to the desired temperature

inside the menu "SET TEMP ROOM".

• To see the set temperature, press once P1 key.

12.9 FUME TEMPERATURE

To check the fume temperature at the exhaust it is sufcient to keep pressed P2 key.

12.10 SWITCHING OFF

To switch the stove off, keep pressed P4 key: the display shows "FINAL CLEANING". After about 10 minutes, also the

fume fan switches off (this happens always, independently if the stove is hot or cold). Then "OFF" will be shown.

12.11 CLOCK SETTING

• Press P3 key and then P5 key till underlining "SET CLOCK" menu (02).

• Press once P3 (DAY) and with P1 and P2 keys select the day of the week (Monday, Tuesday, Wednesday,

Thursday, Friday, Saturday, Sunday).

• Press for the second time P3 key (HOURS) and with P1 and P2 keys set the hour.

• Press for the third time P3 key (MINUTES) and with P1 and P2 keys select the minutes. Press for the fourth time

P3 key (DAY) and with P1 and P2 keys select the day of the month (1,2,3...29,30,31).

• Press for the fth time P3 key (MONTH) and with P1 and P2 keys select the month:

• Press for the sixth time P3 key (YEAR) and with P1 and P2 keys select the year.

• To exit from the programme press P4 twice.

12.12 DAILY PROGRAMMING

It allows to enable, disable and settle the daily chronothermostat functions.

Press P3 key and then P5 key till the menu "SET CHRONO" Press once P3 key and with P5 and P6 keys select the

"PROGRAM DAY". Press once P3 till nding "CHRONO DAY". With P1 and P2 keys put in "OFF" or "ON". It is possible

to set two working times delimited by the set times.

After "CHRONO DAY":

• Press P5: the display shows "START 1", with P1 and P2 keys set the ignition time value or put in "OFF".

• Press P5: the display shows "STOP 1", with P1 and P2 keys set the switching off time value or put in "OFF".

• Press P5: the display shows "START 2", with P1 and P2 keys set the ignition time value or put in "OFF".

• Press P5: the display shows "STOP 2", with P1 and P2 keys set the switching off time value or put in "OFF".

• Press P4 key three times to exit from the menu.

12.13 WEEKEND PROGRAMMING

It allows to enable, disable and settle the chronothermostat functions during saturday and sunday.

Press P3 key and then P5 key till the menu "SET CHRONO". Press once P3 key and with P5 and P6 keys select

"PROGRAM WEEKEND". Press once P3 till nding "CHRONO WEEKEND". With P1 and P2 keys put in "OFF" or "ON". It

is possible to set two working times delimited by the set times and valid only for saturday and sunday.

After "CHRONO WEEKEND";

• Press P5: the display shows "START 1 WEEKEND", with P1 and P2 keys set the ignition time value or put in "OFF".

• Press P5: the display shows "STOP 1 WEEKEND", with P1 and P2 keys set the switching off time value or put in "OFF".

• Press P5: the display shows "START 2 WEEKEND", with P1 and P2 keys set the ignition time value or put in "OFF".

• Press P5: the display shows "STOP 2 WEEKEND", with P1 and P2 keys set the switching off time value or put in

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel PRINCE 3 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel PRINCE 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info