Bedienungsanleitung Cadel RIVERIDRO 23H2O T2 (Seite 15 von 36) (Englisch)

815220

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2

• Press “menu” to confirm and “esc” to exit

k - Smoke rpm % ventilation

To change the parameter act as follows:

• Press the “menu” button.

• Scroll to “Settings” using the arrows

• Press “menu” to confirm.

• Scroll to “Smoke rpm variation” using the arrows.

• Press “menu” to confirm.

• Modify the % with the + - keys.

• Press “menu” to confirm and “esc” to exit

l - Maximum power

It allows to set the maximum flame limit at which the boiler can operate to reach the set temperature target.

To change the power act as follows:

• Press the “menu” button.

• Scroll to “Settings” using the arrows

• Press “menu” to confirm.

• Scroll to “Maximum power” using the arrows.

• Press “menu” to confirm.

• Change the power from 01 to 05 with the + - keys

• Press “menu” to confirm and “esc” to exit

m - Components test

It can only be carried out with the boiler switched off, it allows to select the components to be tested:

• Spark plug: it is turned on for a fixed time of 1 minute during which the panel displays the countdown seconds.

• Feed screw: it is powered for a fixed time of 1 minute during which the panel displays the countdown seconds.

• Extractor: it is activated at 2500 rpm for a fixed time of 1 minute during which the panel displays the countdown seconds.

• Exchanger: it allows to carry out the test in V5 for a fixed time of 1 minute during which the panel displays the countdown

seconds.

• Pump: it is activated for a fixed time of 10 seconds during which the panel displays the countdown.

• 3 way: the 3 way valve is activated for a fixed time of 1 minute during which the panel displays the countdown seconds.

• Cleaner: is activated for 2 cleaning cycles.

To activate the “Components test” function (only when the boiler is switched off) act as follows:

• Press the “menu” button.

• Scroll to “Settings” using the arrows

• Press “menu” to confirm.

• Scroll to “Components test” using the arrows.

• Press “menu” to confirm.

• Select the test to be performed with the + - keys

• Press “menu” to confirm and “esc” to exit

n - Chimney sweep function

This function can be activated only when the boiler is on and with power output and heating operation power with parameters

P5, with fan (if present) in V5. Any loading/smoke ventilation percentage corrections must be taken into account. This status lasts

20 minutes, the countdown is displayed on the panel. During this interval the thermostat/puffer/room set point/H20 set point are

not taken into account, only the safety shutdown at 85°C remains active. At any time the technician can interrupt this stage by

quickly pressing the on/off key.

To activate the “Chimney sweep” function act as follows:

• Press the “menu” button.

• Scroll to “Settings” using the arrows

• Press “menu” to confirm.

• Scroll to the “Chimney sweep” function using the arrows.

• Press “menu” to confirm.

• Select “On” with the + - keys (Off by default)

• Press “menu” to confirm and “esc” to exit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel RIVERIDRO 23H2O T2 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel RIVERIDRO 23H2O T2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info