Bedienungsanleitung Cadel RIVERIDRO 23H2O T2 (Seite 26 von 36) (Englisch)

815220

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2

Attention! When cleaning is completed, remember to put part “C”, brazier “B” and ash pan “D” back in place

and close all the doors (“G”, “H”, “F”)back up again.

11.6 FUME PIPES ANNUAL CLEANING

Clean annually from soot with brushes.

The cleaning operation must be executed by a specialized stove-repairer who will provide for the cleaning of fume pipe, chimney

flue and chimney pot. He will also check their eficiency and will release a written declaration of the safety of the appliance. This

operation must be executed at least once a year.

11.7 GENERAL CLEANING

For cleaning external and inner parts of the stove do not use steel wools, muriatic acid or other corrosive and abrasive materials.

11.8 CLEANING OF PAINTED METAL PANELS

To clean painted metal panels use a soft cloth. Do not use degreasant agents like alcool, diluents, acetone, gasoline because these

could irremediably damage the varnish.

11.9 CLEANING OF CERAMIC AND STONE PANELS

Some stove models has an external lining made up of ceramic or stone. These pieces are handmade therefore they could inevitably

present crazings, seedinesses, shadings.

To clean ceramic or stone panels use a soft and dry cloth. If using any cleaners this will seep through the crazings putting them in

evidence.

11.10 GASKET REPLACEMENT

In case of deterioration of fire door, hopper or fume chamber gaskets, it is necessary to replace them by an autorized technician in

order to guarantee the good running of the stove.

Use exclusively original spare parts.

11.11 GLASS CLEANING

The glass-ceramic of the fire door is able to stand till 700°C but not to thermal shocks.

The probable cleaning with usual sale product for glass cleaning must be effected at cool glass in order to avoid explosions.

You should clean the fire door glass every day!

11.12 CLEANING THE EXCHANGER AND THE COMPARTMENT UNDER THE BRAZIER EVERY 2/3 DAYS

Cleaning the exchanger and the compartment under the brazier is a simple task but very important to always maintain the decla-

red performance.

As such, we recommend cleaning the internal exchanger every 2-3 days, following these simple tasks in order:

• Activate “CLEANING” function - when the boiler is off, press - menu, select “Settings”, use the <> arrows to select “Clea-

ning”, confirm with “Menu”, active cleaning “ON” using the +- keys. This procedure activates the smoke extraction fan to the

maximum, in order to expel the soot that is stirred up while cleaning the exchanger.

• Clean the pipe unit - Using lever “A”, located under the tank cover, vigorously shake the turbulators 5-6 times. This removes

the soot deposited on the exchanger smoke ducts during normal boiler operation.

• Disable the “CLEANING” function - this function is automatically disabled after two minutes. If you need to stop this fun-

ction sooner, press the “Esc” key.

• Clean the smoke conveyor compartment(fig. on next page)

• The boiler is equipped with a removable ash drawer to collect any soot and ash build-up (previous page).

• Once cleaning is complete, close the cover and ash drawer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel RIVERIDRO 23H2O T2 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel RIVERIDRO 23H2O T2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info