Bedienungsanleitung Cadel SATURNO 16 (Seite 19 von 40) (Englisch)

815226

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SATURNO 16 - 24

9.5 AUTO ECO MODE SEE SECTION FG

To activate the “Auto Eco” mode and adjust the time refer see section f-g.

The possibility to adjust the “ECO shutdown t” comes from the need to ensure proper operation in the various rooms the boiler

can be installed in and prevent continuous shutdowns and start-ups in the event the temperature is subject to sudden changes (air

currents, poorly insulated rooms, etc.).

The ECO shutdown procedure is activated automatically when all the power demand devices involved in the “system configu-

ration” are satisfied: room probe/external thermostat, flow switch, puffer thermostat/ntc (10 k ß3435) or boiler thermostat/

ntc (10 k ß3435). If all devices present are satisfied the “ECO shutdown t” time decrease starts (by default 10 minutes, it can

be changed within the “Settings menu”). During this stage the panel displays ON with a small flame and alternately Chrono (of

active) - Eco active. The minutes indicating the countdown for the Eco Stop are shown at the top of the display. The flame goes into

P1 and stays there until the programmed “Eco shutdown t” time has elapsed and if the conditions are still satisfied, it goes into the

shutdown stage. The ECO switch off countdown resets if one of the devices boosts power again.

When switch off starts the panel displays: Off - Eco Active - small flashing flame.

Once the boiler has reached the off condition, the panel displays OFF-ECO with the extinguished flame symbol.

To restart from ECO the following conditions must be satisfied simultaneously:

• Power demand

• After 5 minutes from the beginning of shutdown.

• TH2O < TSetH2O.

• If the domestic hot water (DHW) demands power - if envisaged - the first 5’ are ignored and the boiler restarts as needed.

NOTE: In configuration 4 - 5 the Auto Eco mode is enabled automatically. Even when one sets the “summer” function in configura-

tion 2 - 3 it is enabled automatically. In the cases where it is designed to be active, it is not possible to deactivate the mode.

9.6 PROGRAMMED MODE TIMER  MAIN MENU

Setting the current day and time is essential for the proper operation of the timer.

There are six TIMER programmes, for each one the user can decide the start-up and shutdown time as well as the day of the week

in which it is active.

When one or more programmes are active, the panel alternately displays the boiler status and TIMER “n” whereby “n” is the

number relating to the activated timer programmes, separated from each other with a dash

Example:

• TIMER 1 Timer programme 1 active.

• TIMER 1-4 Timer programmes 1 and 4 active.

• TIMER 1-2-3-4-5-6 Timer programmes all active.

EXAMPLE OF PROGRAMMING

With boiler on or off:

• access the MENU,

• scroll to TIMER with the <> arrows,

• press the “Menu” key

• the system proposes “P1” (Press the <> keys for the subsequent timers P2,P3, P4, P5, P6)

• to activate “P1” press the “Menu” key

• press + - and select “ON”

• confirm with the “Menu” key

At this point it will propose 00:00 as starting time, with key + - adjust the starting time and press the “menu” key to confirm.

The next step proposes a shutdown time of 10 minutes above that set for start-up: press the + key and adjust the shutdown time,

confirm with the “menu” key.

Subsequently the system proposes the days of the week in which to activate or deactivate the previously set timer. With the - or +

key highlight with the white background the day in which one wishes to activate the timer and confirm with the “menu” key. If no

day of the week is confirmed as active, in turn the timer programme will not appear active in the status screen.

Continue to program the following days or press “ESC” to exit. Repeat the procedure to program the other timers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel SATURNO 16 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel SATURNO 16

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info