Bedienungsanleitung Cadel Shell 3 - 2019 (Seite 21 von 44) (Englisch)

696340

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

KRISS

- TECNA

- EVO

- ELISE

- SHELL

- CRISTAL

- GLASS - VERVE AT - PRETTY AT - TITANIA AT - VENERE AT - BREEZE AT

• During its running, the stove reaches high temperatures: keep away childreen and animals

and for your safety please use appropriate fireproof devices, such as heat-protecting gloves.

• The stove is equipped with a safety device that stops the feed screw immediately when the

pellet loading door is opened. This safety device (standard EN 60335-2-102) prevents the user

from coming into contact with the moving parts of the appliance.

• The chimney flue must be cleaned, since the soot and unburnt oil deposits reduce its sec-

tion so blocking the draught. In great quantities they can flare up.

• If the pellets are of bad quality (if contains sizing agents, oils, varnishes, plastic remains or

if it is mealy), deposits will form along pellets drop pipe during the running. When the stove is

switched off, these remains could form little hot coals that rising along the pipe could reach the

pellets on the hopper burning them and creating a thick and harmful smoke inside the room.

Please always keep the hopper closed with its own lid. If the pipe is sooty, please clean it.

• In case it would be necessary to extinguish the fire emitted by the stove or by the chimney

flue, use a fire-extinguisher or contact the firemen. Do not use water to extinguish the fire

inside the burning pot.

5 WARRANTY CONDITIONS

The company guarantees the product, with the exception of elements subject to normal wear listed below, for a period of

2 (two) years from the date of purchase attested by:

• a document to serve as proof of purchase (invoice and/or receipt) that shows the name of the vendor and the date on which

the purchase was made;

• forwarding of the completed certificate of guarantee within 8 days of purchase.

Furthermore, the product must be installed and started by specialised personnel who must, where provided, issue a declaration of

conformity of the plant and of the proper functioning of the product, for the warranty to be valid and effective.

We recommend testing the product before completion with the relative finishes (claddings, painting of walls, etc.).

Installations not meeting the current standards, improper use and lack of maintenance as expected by the manufacturer, void the

product warranty.

The guarantee is valid on the condition that the instructions and warnings contained in the use and maintenance manual are

observed, and therefore the product is used correctly.

The replacement of the entire system or the repair of one of its components does not extend the guarantee period, and the original

expiry date remains unchanged.

The guarantee covers the replacement or free repair of parts recognised as being faulty at source due to manufacturing

defects.

To benefit from the guarantee, in the event of a fault, the customer must have the guarantee certificate and present it with the

proof of purchase document to the Technical Assistance Office.

The guarantee does not cover malfunctions and/or damage to the appliance that arise due to the following causes:

• Damage caused during transportation or relocation.

• All parts that develop faults due to negligence or improper use, incorrect maintenance, installation that does not comply with

the manufacturer's instructions (always refer to the installation and use manual provided with the appliance).

• Incorrect dimensioning with regards to the use or faults in the installation or failure to adopt the necessary devices to guaran-

tee proper execution.

• Improper overheating of the equipment, use of fuels not conforming to the types and quantities indicated in the instructions

provided.

• Further damage caused by incorrect user interventions in an attempt to fix the initial fault.

• Worsening of the damage due to the continued use of the equipment by the user, once the defect has been noticed.

• In the presence of a boiler, any corrosions, incrustations or breaks caused by water flow, condensation, hardness or acidity of

the water, improperly performed descaling treatments, lack of water, mud or limescale deposits.

• Inefficiency of chimneys, flues or parts of the plant affecting the equipment.

• Damage caused by tampering with the appliance, atmospheric agents, natural disasters, vandalism, electrical discharges, fires,

faults in the electric and/or hydraulic system.

• Failure to have the stove cleaned on an annual basis by an authorised technician or qualified personnel will result in the loss

of the warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel Shell 3 - 2019 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel Shell 3 - 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info