Bedienungsanleitung Cadel SQUARE (Seite 5 von 36) (Englisch)

643389

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

CLOE - CLOE

- SQUARE

• During its running, the stove reaches high temperatures: keep away childreen and

animals and for your safety please use appropriate reproof devices, such as heat-

protecting gloves.

• If the auger is blocked by a foreign object (for example: nails), and if it needs to

be cleaned, do not remove the hand rejector and do not touch the auger. Please

contact the Technical Assistance service.

• The hand rejector can be removed exclusively by an authorized technician.

• The chimney ue must be cleaned, since the soot and unburnt oil deposits reduce

its section so blocking the draught. In great quantities they can are up.

• If the pellets are of bad quality (if contains sizing agents, oils, varnishes, plastic

remains or if it is mealy), deposits will form along pellets drop pipe during the running.

When the stove is switched off, these remains could form little hot coals that rising

along the pipe could reach the pellets on the hopper burning them and creating a

thick and harmful smoke inside the room. Please always keep the hopper closed with

its own lid. If the pipe is sooty, please clean it.

• In case it would be necessary to extinguish the re emitted by the stove or by the

chimney ue, use a re-extinguisher or contact the remen. Do not use water to

extinguish the re inside the burning pot.

WARRANTY CONDITIONS

The company guarantees the product, with the exception of elements subject to normal wear listed below, for

a period of 2 (two) years from the date of purchase attested by:

• a document to serve as proof of purchase (invoice and/or receipt) that shows the name of the vendor and

the date on which the purchase was made;

• forwarding of the completed certicate of guarantee within 8 days of purchase.

Furthermore, the product must be installed and started by specialised personnel who must, where provided,

issue a declaration of conformity of the plant and of the proper functioning of the product, for the warranty to

be valid and effective.

We recommend testing the product before completion with the relative nishes (claddings, painting of walls,

etc.).

Installations not meeting the current standards, improper use and lack of maintenance as expected by the

manufacturer, void the product warranty.

The guarantee is valid on the condition that the instructions and warnings contained in the use and maintenance

manual are observed, and therefore the product is used correctly.

The replacement of the entire system or the repair of one of its components does not extend the guarantee

period, and the original expiry date remains unchanged.

The guarantee covers the replacement or free repair of parts recognised as being faulty at source due to

manufacturing defects.

To benet from the guarantee, in the event of a fault, the customer must have the guarantee certicate and

present it with the proof of purchase document to the Technical Assistance Ofce.

The guarantee does not cover malfunctions and/or damage to the appliance that arise due to the following

causes:

• Damage caused during transportation or relocation.

• All parts that develop faults due to negligence or improper use, incorrect maintenance, installation that does

not comply with the manufacturer's instructions (always refer to the installation and use manual provided with

the appliance).

• Incorrect dimensioning with regards to the use or faults in the installation or failure to adopt the necessary

devices to guarantee proper execution.

• Improper overheating of the equipment, use of fuels not conforming to the types and quantities indicated in

the instructions provided.

• Further damage caused by incorrect user interventions in an attempt to x the initial fault.

• Worsening of the damage due to the continued use of the equipment by the user, once the defect has been

noticed.

• In the presence of a boiler, any corrosions, incrustations or breaks caused by water ow, condensation,

hardness or acidity of the water, improperly performed descaling treatments, lack of water, mud or limescale

deposits.

• Inefciency of chimneys, ues or parts of the plant affecting the equipment.

• Damage caused by tampering with the appliance, atmospheric agents, natural disasters, vandalism,

electrical discharges, res, faults in the electric and/or hydraulic system.

• Failure to have the stove cleaned on an annual basis by an authorised technician or qualied personnel will

result in the loss of the warranty.

Also excluded from this guarantee are:

• Parts subject to normal wear such as gaskets, glass, claddings and cast iron grids, painted, chrome-plated or

gilded parts, handles and electric cables, bulbs, indicator lights, knobs, all parts which can be removed from

the hearth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cadel SQUARE Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cadel SQUARE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info