Bedienungsanleitung Caldera Paradise - serie 2020 (Seite 30 von 44) (Englisch)

784916

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Spa Care and Maintenance

Page 27

gallons) of spa water into the filter compartment. This is twice the

normal amount of chlorine needed for superclorination. This extra

amount of chlorine is needed to destroy the anti-freeze.

NOTE: A defoamer may be needed to decrease the amount of

foam caused by the anti-freeze.

4. Drain your spa to ensure removal of anti-freeze. Do not drain water

on grass or plants due to excessive chlorine level.

5. After the spa has completely drained, re-install your filter and

follow the Start-up Procedures in the Getting Started section of the

Owner’s Manual.

IMPORTANT: Always keep spa covered when not in use, whether it

is empty or full.

CARE OF THE SPA PILLOWS

The spa pillows will provide years of comfort if treated with care. They

have been positioned above the water level to minimize the bleaching

effects of chlorinated water and other spa water chemicals. To extend

their life, whenever the spa shell is being cleaned, the spa pillows should

be removed and cleaned. Body oils can be removed with a mild soap

and water solution. ALWAYS rinse off the spa pillows thoroughly to

remove any soap residue. If the spa is not going to be used for a long

period of time (that is during a vacation or if the spa is winterized), or

when the spa water is being super-chlorinated, the spa pillows should be

removed until the next use of the spa.

TO REMOVE AND REPLACE THE SPA

PILLOWS:

1. Carefully lift one end of the pillow away from the spa shell.

2. Continue lifting one end until all pillow retainers are released from the

pillow.

IMPORTANT: Just pulling the pillow straight up and out of the shell

recess will eventually damage the pillow. This abuse is not covered

under warranty.

3. To reinstall the spa pillow, carefully bend the pillow slightly to allow

one of the pillow retainers to slip into the recess in the back of the

pillow.

4. Keeping the pillow slightly bent, slide the other pillow retainer into the

recess in the back of the pillow.

5. After all the pillow retainers are in place, press the pillow down into

the recess in the spa shell.

CARE OF THE EXTERIOR

SPA SHELL

Your CALDERA

spa has an acrylic shell. Stains and dirt generally will

not adhere to your spa’s surface. A soft rag or a nylon scrubber should

easily remove most dirt. Most household chemicals are harmful to your

spa’s shell. Always rinse off any spa shell cleaning agent with fresh

water.

SPA SKIRT

When cleaning the skirt of your spa, use only a soft cloth or sponge with

a mild soap and water solution. The use of an abrasive type cleaner or

applicator will be harmful to the exterior finish. Always thoroughly rinse

off the spa skirt with fresh water.

CARE OF THE SPA COVER

WARNING: The cover is a manual safety cover that meets or

exceeds all prevailing requirements of ASTM Standards for spa safety

covers when installed and used correctly as of the date of manufacture.

Non-secured or improperly secured covers are a hazard. Open the cover

to its fully open position before use.

VINYL COVER

The vinyl spa cover is an attractive, durable foam insulation product.

Monthly cleaning and conditioning are recommended to maintain its

beauty.

TO CLEAN AND CONDITION THE VINYL

COVER:

1. Remove cover from the spa and gently lean it against a wall or fence.

2. With a garden hose, spray cover to loosen and rinse away dirt or debris.

3. Using a large sponge and/or a soft bristle brush and a very mild soap

solution (1 teaspoon dishwashing liquid with 7.5 liters [2 gallons] of

water) or baking soda (sodium bicarbonate), scrub the vinyl top in a

circular motion. Do not let the vinyl dry with a soap film on it before it

can be rinsed clean.

4. Scrub the cover’s perimeter and side flaps. Rinse clean with water.

5. Rinse off the underside of the cover with water only (don't use soap),

and wipe it clean with a dry rag.

6. Use FRESHWATER Cover Shield to protect the cover.

SERVICE NOTE: To remove tree sap, use cigarette lighter fluid (not

charcoal lighter fluid). Use sparingly, and rinse with a saddle soap solution

immediately afterwards, then wipe dry.

IMPORTANT REMINDERS:

• DO remove snow buildup to avoid breakage of the foam core from

the additional weight of the snow.

• DO lock cover lock straps to secure the cover when the spa is not

in use.

• DO NOT drag or lift the spa cover using either the flaps or the cover

lock straps.

• DO NOT walk, stand, or sit on the cover.

• DO NOT place any metal or heat transferring object on the cover

or place any type of plastic tarp or drop cloth over the cover as

this may result in a melted foam core, which would not be covered

under the warranty.

• DO NOT use any lifting mechanisms, chemicals or cleaners except

those recommended by Watkins Wellness or its Authorized Sales

and Service Dealer.

Spa Care and Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caldera Paradise - serie 2020 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caldera Paradise - serie 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info