Bedienungsanleitung Caldera Paradise - serie 2022 (Seite 17 von 44) (Englisch)

784914

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Page 14

operatInG InStructIonS

MAIN CONTROL PANEL

The main control panel provides a quick visual check of the spa’s status

and allows the user to set the temperature, activate the jets & lights, lock

the temperature and/or spa functions. Other optional functions may also

be available depending on the spa model and accessory equipment that

has been installed into the spa. The main control panel has eight buttons.

HARD BUTTONS

The four labeled outer buttons are referred to as "Hard buttons". These

buttons are fixed and their functions do not change.

JETS - If jet pump indicator light is off and JETS hard button is pressed,

the 1st jet pump function will activate and the main control panel display

will advance to the Jets menu.

If jet pump indicator light is on and the JETS hard button is pressed while

in any screen other than the Jets menu, the jets pump function does not

change, only the main panel screen will change to the Jets menu.

LIGHTS - If lights are off, press LIGHTS hard button from any screen

to turn on all lights and display the Lighting Options menu. Continue to

press the LIGHTS hard button to cycle through lights zones.

OPTIONS - Transitions to the Options screen to access temperature and

setup menu

BACK - Goes back one menu. In Home screen Hold BACK button until

screen rotates 180° to view from inside spa. Repeat to reverse.

SOFT BUTTONS

The four inside buttons are referred to as "soft buttons". Pressing a soft

button will activate the function on the control panel screen closest to that

button. After a period of non-use (45 seconds) the display will go back to

the Home screen and will remain on for several minutes before going to

sleep mode. Pressing any button will wake up a sleeping display.

INDICATOR ICONS

At a glance, the indicator icons are visible on the main control panel.

The indicator icons work independently from the rest of the control panel

display. They are displayed so that you may know the status of your spa

at a glance. NOTE: Indicators will not be visible when Main Control Panel

goes into sleep mode.

READY Indicator: The READY indicator will display when the

spa water temperature is within 1°C (2°F) of the set

temperature, and will turn off when the temperature is outside of

that range. If you increase or decrease the temperature setting

of the spa, the ready indicator will turn off until the water

temperature reaches the acceptable range for the new

temperature setting. A flashing READY indicator means a

problem may exists with the temperature sensor (see

Troubleshooting section for more information)

Spa Light Indicator: The Spa Light indicator is displayed when

any light inside the spa is on. The indicator icon will remain solid

as long as any manual light is activated.

Spa or Temperature Lock Indicator: The Spa or Temperature

Lock indicator is displayed when either the Spa Lock,

Temperature Lock or both are activated. Lock indicator does not

flash.

Jet Pump Indicator: The Jet Pump indicator is displayed

whenever a jet pump is on. The Jet Pump indicator will flash

whenever the spa is in the ten-minute Clean Cycle or Auto

Clean Cycle.

Summer Timer Indicator: The Summer Timer indicator is

displayed when the summer timer is set to ON. In summer timer

mode, the heater and circulation pump cycle are off for eight

hours. The Summer Timer indicator will not flash.

POWER Indicator: The POWER indicator is ‘on’ when the spa

is properly supplied with power. It also provides a diagnostic

function–a flashing power indicator indicates that the heater high

limit has tripped, meaning that either the spa water is above its

acceptable temperature range, or a malfunction has occurred

within the spa (such as low circulation due to clogged filters).

When the power indicator is not displayed it means that there is

a problem with the spa control box or the power supplied to the

spa (see Troubleshooting section for more information).

HOME SCREEN

The temperature displayed in the center of the Home screen is the actual

temperature of the spa water. If the READY icon is displayed and solid on

the control panel, then the actual spa temperature is within 1°C (2°F) of

the set temperature. The corner soft button functions are as follows:

MEMORY

This feature will recall the last active

setting for jets and lights prior to

pressing the All Off button.

ALL OFF

This feature will shut jets, lights and

audio (if installed) off immediately, while saving the last active jets and

lights settings.

JETS Hard Button

Soft Button Soft Button

LIGHTS Hard Button

OPTIONS

Hard Button

BACK

Hard Button

Indicator Icons

Operating Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caldera Paradise - serie 2022 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caldera Paradise - serie 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info