Bedienungsanleitung Caldera Vacanza - serie 2022 (Seite 21 von 40) (Englisch)

784919

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Operating Instructions

CONTROL OPERATION

Your control panel consists of an LCD display and convenient touch pads

that allow you to set the water temperature and adjust the skim/filter

cycle settings, lock spa temp, lock all spa functions, as well as control the

hydrotherapy jets, and lights.

LCD DISPLAY INVERSION

You may invert the control panel display for easier viewing from inside the

spa. To invert the display the following is required: Press the MODE()

and (

buttons simultaneously. By pressing the MODE() and (

buttons

simultaneously a second time the screen will go back to it’s original

display.

MODE BUTTON

From the Home screen use the MODE ( or ) button to scroll to the

System, Clean, Audio (if your spa is equipped) and Tools screen. Press

the (

+) button

to enter into the sub screens.

TEMPERATURE CONTROL

The set temperature range is from 26°C

(80°F) to 40°C (104°F). Whenever power is

disconnected and then reconnected to the spa,

the water temperature setting will automatically

return to the last temperature entered into the program.

To increase the set temperature, press the (

button, once for each

degree of increase temperature desired. If you hold the (

button down,

the set temperature will increase by one degree every half second.

To decrease the set temperature, press the (-) button, once for each

degree of decreased temperature desired. If you hold the (-) button down,

the set temperature will decrease by one degree every half second. When

the spa water has reached the set temperature, the “READY” icon will

display.

JET PUMP CONTROL

Pressing the “JETS” button changes the jet

pump functions, depending on the number of

presses:

PALATINO, MARINO & VANTO SPA

MODELS ONLY:

1st press: System 1 jet pump runs on low speed

2nd press: System 1 jet pump runs on high speed

3rd press: System 1 & System 2 jet pumps run on high speed

4th press: System 2 jet pump runs on high speed

5th press Both Systems jet pumps are off

CAPITOLO, CELIO & AVENTINE SPA

MODELS ONLY:

1st press: System 1 jet pump runs on low speed

2nd press: System 1 jet pump runs on high speed

3rd press: Jet pump off

• The pump on high speed automatically turns off after operating

for one hour. The pump on low speed automatically turns off after

operating for one hour.

• When the jets are active, the JETS icon on the control panel will

illuminate.

LIGHT ON/OFF & INTENSITY

CONTROLS

The light control uses four positions: High, Medium, Low, and Off. To turn

on the spa light, press the LIGHT button. This will place all lights in the

spa in the High, or maximum intensity position. When the lights turn on,

the light symbol will also illuminate on the control panel display. Press

the LIGHT button again to lower the intensity of the lights to the Medium

position. Press the LIGHT button again to lower the intensity even more,

placing the lights intensity in the Low position. Press the LIGHT button

one more time to shut the lights off. When the light is deactivated, the

light symbol will also turn off.

If the lights are left on, they will automatically be turned off by the control

system after 6 hours of continuous operation. The light symbol on the

panel will also turn off when the lights are deactivated.

If the lights will not turn on, make sure SPA LOCK is deactivated. SPA

LOCK disables the controls on the control panel (see following pages for

more information on SPA LOCK).

SYSTEM MODE

Your spa is equipped with a System Mode.

This function will allow you to conveniently

turn the jet(s) on high speed and the light on

maximum intensity at the same time.

To activate the system mode, perform the following functions:

Press the MODE ( or ) button until SYSON is displayed on the

screen. Press the (

button to activate the SYSON mode feature. The

jets and light icons will illuminate on the display until the system mode is

deactivated.

Light Icon

Filter Cycle Icon

Jets Button

Light Button

Temperature

Down/Off

Temperature

Up /On

Mode



Power Icon

Sleep

Icon

Temp Ready

Icon

Filter Cycle 2

Icon

Filter Cycle

1 Icon

Jet Icon

Mode 

SET

READY

SET

READY

POWER

READY

POWER

Operating Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caldera Vacanza - serie 2022 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caldera Vacanza - serie 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info