Mounting your Caliber Amplifier
Before mounting your Caliber Amplifier you must carefully choose the place
where it can be installed.The amplifier has to have at least 5 cm (2”) ventilation
space at all sides, to allow the heat to rise away from the amplifier.
Be sure that the power and signal cables can enter and leave the amplifier in a
straight line, to avoid the risk of malfunction.
The amplifier should be protected from exposure to moisture and direct sun-
light.The best places for it to be mounted are:
• The floor of the trunk.
• Under the driver’s seat
• On your sub-woofer case.
If you’ve decided where to place your Caliber Amplifier, and you’ve convinced
yourself there is enough air circulation and protection from unusual hazards,
Mark the mounting surface using the amplifier as a template (Placing masking tape
on these surfaces first will make your markings more visible).
Drill 2.5 mm (1/8”) diameter holes at the marked locations and mount the
amplifier using the supplied self-tapping screws.
Note: Do not drill any holes while using the amplifier as a template.
You can easily damage the amplifier’s anodized coating in this
manner.
Competition CA 510 Pro Series
Maximum Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 2x 510W
4 Ohm 1kHz Mono Bridged 1x1100W
Continuous Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 2x 255W
4 Ohm 1kHz Mono Bridged 1x 510W
Fuse Rating 4x 20A
Dimensions (WxHxD mm) 440 x 60 x 235
4-Channel Amplifiers
Competition CA 470 Pro Series
Maximum Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 4x 130W
4 Ohm 1kHz Mono Bridged 2x 260W
Continuous Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 4x 65W
4 Ohm 1kHz Mono Bridged 2x 130W
Fuse Rating 40A
Dimensions (WxHxD mm) 330 x 60 x 235
6-Channel Amplifier
Competition CA 670 Pro Series
Maximum Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 4x 90W+ 2x 130W
4 Ohm 1kHz Mono Bridged 2x 180W+ 1x 260W
Continuous Power Output at 14,4V
4 Ohm 20Hz - 30kHz THD 0,5% 4x 45W + 2x 65W
4 Ohm 1kHz Mono Bridged 2x 90W+ 1x 130W
Fuse Rating 25A + 20A
Dimensions (WxHxD mm) 400 x 60 x 235
