Bedienungsanleitung Caliber HFG501BTI (Seite 6 von 10) (Englisch)

572040

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Press the and button on the top panel together

Volume - Power/Mode

for more than 5 seconds to start Wi-Fi network setup.

On your iOS device, Mac or PC, select the network called

from Wi-Fi network settings.

Launch a web browser (e.g. Safair, Chrome, or Firefox) and type in

“192.168.1.12” at the address bar.

Select the “Proﬁle Conﬁguration” to set the network setup.

Select preferred Wi-Fi network from the “Select Option”

list of available. If a password is necessary for the Wi-Fi

network, please input it in the “WPA Passphrase”.

After a while, the Wi-Fi status LED stops blinks and stays

green. The unit joins the Wi-Fi network successfully.

Select the same Wi-Fi network on your iOS device, Mac

or PC. Wait until successful Wi-Fi connection to the router.

A Wi-Fi signal icon is displayed on AirPlay device.

Click Apply at the bottom of the page to apply your settings.

And then click OK

settings.

on the popup menu to conﬁrm your

Restart the Wi-Fi network from player

uccess!

Congratulations, you have successfully connected your player to your

wireless network and now you can start enjoying wireless

dio

anywhere in your home or oce.

Note

: To begin using AirPlay wireless streaming, your AirPlay source

devices (Mac or PC with your iTunes library as well as your iPod

touch, iPhone or iPad) must be connec

ted to the same Wi-Fi

network that the unit is connected to.

Wi-Fi Network Setup for AirPlay

Please verify the following steps before attempting to connect your player to a Wi-Fi network:

To enjoy AirPlay wireless audio, you must have the following:

- iTunes or an iOS device (iPod touch, iPhone, or iPad).

- A functioning home network with Wi-Fi.

Download the latest software updates for iTunes and your iOS

device to ensure that you are able to enjoy the latest AirPlay

enhance-

ments and compatibility.

Have your Wi-Fi network name (SSID) and password (if applicable) available for reference.

Note: A

Note: The Wi-Fi status LED blinks in green and red alternately.

irPlay requires iTunes 10.5 (Mac and PC) or later; or an apple device with iOS 5.0 system or later.

Check list

COption B: onnecting with your iPod touch, iPhone, iPad, Mac or PC over Wi-Fi

-5-

To restart the current network, click the Reset button on the right of back panel for 3 seconds, source LED will illumine

lightblue. After a while, the Wi-Fi status LED indicates from green to red .

Connected Not Connected

“HFG 501BTi CALIBER”

AirPort: On

Turn AirPort O

HFG 501BTi CALIBER

Another network

Join Other Nework...

Create Network...

Open Network Preferences...

Devices...

http://192.168.1.12

Customize the name

of your speaker

Select your Wi-Fi

network from list

Click for

conﬁrm

Status Inforamtion

Proﬁle Conﬁguration

Digital Media Player Name:

Active Proﬁle:

Proﬁle name:

Service Set ID (SSID):

WPA Passphrase:

choose Proﬁle to be conﬁgured:

Apply

HFG 501BTi CALIBER

Proﬁle 1

Current Proﬁle

Firmware Update

JB Access Point

Select Option

Apply

Show

Allow Ad-hoc connection: Ad-hoc

Proﬁle 1

Digital Media Player Wireless LAN Settings

[ + ] ADVANCE SETTINGS

HFG 501BTi CALIBER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber HFG501BTI Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber HFG501BTI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info