Bedienungsanleitung Caliber mcd 375 (Seite 23 von 35) (Englisch)

167889

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

E - 24

16.BLUE TOOTH HAND FREE OPERATION

1. When user use our Blue tooth HEAD UNIT, please make sure the mobile phone you use must / does

support Blue tooth functions (Headset or Handsfree profiles or both)

2. Before you start to use our Bluetooth HEAD UNIT, please make sure complete pairing with your mobile phone

first. Please refer to the user manual, section “PAIRING” for detail “PAIRING” instruction. To ensure the best

reception for Pairing or Re-connection, please make sure the Phone Battery is fully charged when making the

Pairing or Re-connection.

3. Please always try pairing the Mobile Phone with Head unit after a few minutes of the Mobile Phone was

Switched On to ensure the best pairing result.

4. “BT60” is this unit device model number which is displayed on the mobile phone.

5. To achieve the best performance, please always keep the Mobile Phone within 3 meters of the Head unit.

6. Please always keep a clear path between the Mobile Phone & the Head unit.

7. Never put any metal object or any obstacle between the path of the Mobile Phone & the Head unit.

8. Some brand of Mobile Phone like Sony Ericsson may have "Power Saving Mode" selection when Blue Tooth

mode is switched on. PLEASE DO NOT Switches ON Power saving Mode when operating with this Head Unit, as

some abnormal communication behavior will happen occasionally if Power Saving Mode is switched on.

9. Before user make Outgoing call or Incoming call, make sure the mobile phone's “Blue Tooth function” was

switched “ON”.

10. To ensure the best conversation quality / performance, please always keep talking within 1 meter of the

Head Unit.

11. If user want to Dis-connect the Head unit with the Mobile Phone, please switch "OFF" Blue Tooth

connectivity on the Mobile Phone,or go to the system menu, "dis-connect" to disconnect the bluetooth

connectivity manually. ( please refer to the user manual, section "dis-connection of the bluetooth system for

details instruction. )

12. Some Mobile Phones can support “IN BAND RING TONE”, such as Nokia. In such case, the Incoming

Ringing Tone will be same as the original Ring-tone of the Mobile Phone. But some Mobile Phones like Sony

Ericsson do not support this feature. The Ring-tone will be using the standard Ring-tone of the Head unit.

User Guide For Blue Tooth Operation

13. When in telephone mode, during talking, it is highly recommended to set the volume to below “30”

in order to achieve the best sound quality. As if the volume is too high, it may create unwanted echo

inside the car, and this unwanted echo may feedback into the microphone.

14. If the Bluetooth related operation is not performing normally, like cannot make pairing, cannot making an

outgoing call, User can try to make a SOFT-RESET of the Bluetooth module by removing / detaching the

panel from the main unit and waiting for about 1 min. Then re-attach the panel to the unit & retry the

Bluetooth operation again. Or user can RESET the whole unit by pressing the RESET button behind the

panel.

By pressing the RESET button all the stored memory will resume to factory default

FAQ (Frequency Asking Questions)

Q: Under phone conversation, if the voice output from the car's speakers is not loud enough.

A: Try increase the volume level of the head unit to a suitable sound level

Q: Under phone conversation, the “Listener” cannot hearing my voice loud enough

A: First, try asking the 'Listener” increase the volume level on his/her mobile phone, if still not loud enough, try to

increase your mobile phone's volume.

Q: Under Phone conversation, the “Listener' can hear echo feedback.

A: Your unit's speaker volume level is too loud which cause the voice feedback into the built-in microphone,

this can be corrected by decreasing the volume level.

Q: Under Phone conversation, the “Listener' complain the background is too noisy

A: May be you are in a noisy environment. Try close the car's window to shield the environment / background

noise under phone conversation.

Q: If the Mobile Phone already paired with the headunit, but after several calls, the incoming calls cannot access

thru the headunit.

A: May be the paired Mobile Phone lost the Bluetooth connection with the headunit. in this case, please go to the

"MENU" & select "re-connect" to reconnect the headunit with the paired Mobile Phone. For details, please refer

to the MENU operation "re-connection”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber mcd 375 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber mcd 375

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info