Bedienungsanleitung Caliber mcd 786 (Seite 19 von 34) (Englisch)

169032

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Dual Zone Operation

To Switch On Dual Zone Mode

The Available Playback Mode

To Select Front/Rear Sources

To Operates Function of Front /

Rear Soures

This unit is equipped with the most advance

“Dual Zone” feature. This function is useful if

the user would like to select different modes of

the Audio and Video output source for Front

and Rear Speakers and TFT Screens. For

example, user can select to listen to Tuner

music for front speakers and rear speaker for

DVD movie.

E - 8 1

1. “Off” is the default setting.

1. Front Zone: Tuner and BT Audio modes are

available select for playback on Front Zone.

Once “On” is selected, use to access

2. Long press the button on the control

panel or remote control to access into Dual

Zone Control mode:

and use select 2-Zone to On.

to Front or Rear mode by rotate to select

the mode want to playback.

1. The Front Panel & Remote control, is

defaulted to control the FRONT source's

function / operation.

2. When DUAL ZONE is turned “On”, the

button is used to change Front source & Rear

source. Press the button repeatedly to

change between Front and Rear.

The default audio output reverts to what the

user selected for the FRONT Zone source

when DUAL ZONE IS “OFF”. For example:

When the DUAL Zone is “ON “, user has

selected DVD for Front ZONE & Tuner for Rear

ZONE. Once DUAL ZONE is turned “OFF”,

Audio Output for all 4 speakers becomes

“DVD” mode.

The Default Setting When Dual

Zone is “On”

To Switch Off Dual Zone Mode

The Default Setting When Dual

Zone Is In “off” Mode

3. The TFT screen will display the Rear Source

mode for 10 seconds. User has 10 seconds

to make the desired operation on the Rear

Source's function on the Front Panel or

Remote Control.

4. The will automatically switch

back to the Front Source after 10 seconds.

And the Front Panel and Remote now is

resumed to operate for Front Source's

function again.

TFT screen

1. When DUAL ZONE is turned on, the audio

output will be muted for about 1 second.

2. The default source / mode for Front ZONE is

Tuner & for Rear ZONE is “DVD”.

3. The default Volume level is “12” for both

Front & Rear ZONE audio output. (or the

Volume Level set as VOL PGM Level set in

the Menu).

4. The TFT screen is defaulted to display the

Front Mode.

5. When Dual Zone is “On”, some of the

AUDIO FUNCTIO N WILL NOT BE

FUNCTIONAL, THESE FUNCTION ARE:

Bass / Treble / Middle / Balance / Fader /

Sub-woofer / iX-bass.

Long press button to access into Dual

Zone and by rotate select Off mode.

TIPS

Long press “ System Menu” and access

into Dual Zone mode is same can be

operation the Off mode..............................

NOTE

AV-1 & AV 2 are considered as the same mode

/source in the DUAL ZONE function. So if either

the Front or Rear Source is set to AV-1 or AV-2

mode, The other ZONE is not allowed to select

the AV-2 or AV-1 Mode eg: If F-Zone is selected

“AV-1”, then R-Zone is not allow to have ”AV-2”.

2. Rear Zone: Tuner , Media (DVD/USB/SD) AV

modes are available select for playback

Rear Zone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber mcd 786 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber mcd 786

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info