Bedienungsanleitung Caliber MCD264BT (Seite 9 von 20) (Englisch)

572014

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Reset the unit

Power on/off

1.Turn off the unit power.

2.Press the ( ) button and remove the

front panel, then press the button

with a ballpoint pen or similar object to

restart the unit.

()onthe

head unit or remote control

- Rotate the volume control to adjust

volume level.

- Press the button short and repeatedly

to select the

volume, bass, treble,

balance and fader.

- Rotate the volume control to adjust level of

the selected sound mode:

- VOL:0,1 ~ 44,45

- BAS / TRE: -7, -6 ~,0, ~ +6,+7,

- BAL: 8L,7L, ~,0, ~, 7R,8R

-FAD:8F,7F,~,0,~,7R,8R

1. In each mode, w

Press the button and hold for more

than 2 seconds to access system setup

menu mode, then

“INVOL 17”(Initial Volume) “ADJ 00:00”

(adjust the clock) “BEEPALL”(beep tone

REL

RESET

SEL

Note:

SEL

In power off mode, switch on the unit by

pressing any button except the ( )

button. When the system is on, press and

hold the on/off button

for about 2

sceconds to turn off the unit.

REL

POWER

Sound adjustment

System menu

When operating the unit for the first time,

after replacing the car battery or changing

the connections, you must reset the unit.

the sound setting that you

would like to adjust:

hen the unit has not been

adjusted for about 5 seconds, the current

setting will be saved and it returns to the

previous mode.

2. When using preset EQ modes, you

cannot have access to Bass and Treble

settings.

press the button

momentarily to select the menu items in

sequence as follows:

SEL

mode) “TAVOL 17” (traffic announcement

volume) “EON ON” (EON on/off) “DSP

NONE” (equalizer mode) “LOUD OFF”

(loudness on/off) “LOC OFF” (local

stations on/off) “STEREO” (STEREO/

MONO) “ALRM ON”(Alarm on/off) EXIT

After selecting the desired menu item,

to select the mode

of the selected item.

“ ” will be visible on the LCD

display, r to adjust

the initial volume of this unit.

“ ” will be visible on the LCD

display,

to adjust hour,

to adjust minute.

The car audio device is equipped with 3

beep tone modes.

The beep sound is on

when any key is pressed.

The beep sound will be

heard when you hold down a button with a

dual function, which activates the second

function of this button.

The beep sound is

disabled.

This function allows you to define the

minimum volume for the traffic

announcements. The adjustable range is

0~45. The defaulted value is 17.

to adjust the volume of the

traffic announcements.

The car audio device is equipped with 4

preset equalization modes.

to select one of the EQ

modes with following sequence:

DSP NONE (OFF)

ROCK POP FLAT

INITIAL VOLUME:

INVOL 17

CLOCK ADJUST:

ADJ 00.00

BEEP TONE MODE:

- Beep ALL mode:

- Beep 2nd mode:

-Beepoffmode:

Traffic announcement volume:

EON ON/OFF:

DSP EFFECT:

to choose EON

ON or EON OFF.

one of

the beep tone modes.

otate the volume control

otate the volume control clockwise

otate the volume control

counter-clockwise

Rotate the volume control to select

Rotate the

volume control

Rotate the volume control

Rotate the

volume control

Rotate the volume control

CLAS(classical)

LOUD ON/OFF:

to choose

loudness on or off.

General Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber MCD264BT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber MCD264BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info