ENGLISH
9
activate the connection mode.
2.The unit will display “RE-CONN:1 >>” during the connecting period.
3.If the re-connection is succesfull, the unit will display “RE-CONN:1 V”. If the
re-connection is failed, the unit will display “RE-CONN:1 X”.Than the unit will
automatically switch to the previous mode.
NOTE:- Keep the mobile phone within 2 meter from the unit during Re-connection.
-The manual re-connect is only function with the mobile phone if it has already been
paired with the head unit before.
The head unit will automatically re-connect by the following operations:
-Every time you turn on the ignition key from “OFF” to “ON”.
-Every time you press the volume knob (8) longer than 3 seconds and press button (9)
“MODE” shortly to confirm dialing a call.
DIS-CONNECTION
This option can be used to Dis-connect the paired mobile phone from the head unit.
1.Press volume knob (8), rotate the volume knob to select “DIS-CONN”.Then press
button (8) to activate the dis-connection mode.
2.The unit will display “DIS-CONN:1 >>” during the Dis-connecting period.
3.If the re-connection is succesfull, the unit will display “DIS-CONN:1 V” and the unit
will automatically switch to the previous mode.
INCOMING CALL
ANSWER AN INCOMING CALL
1.When there is an incoming call, the unit will display “Caller ID” and keep blinking. If
the incoming call has no caller ID, the unit will display “PHONE IN”.Than you can
press the volume knob (8) or button (9) “MODE” to answer/accept the call.
2.Use the volume knob (8) to adjust the volume level.
3.Press button (2) “CLEAR” to end the conversation. the unit will automatically
switch to the previous mode and release the mute of the previous mode at the
same time.
NOTE:- If their is an incoming call in the stand by mode (Ignition on & Power off), the
system will automatically switch on the head unit.
- If the bluetooth related operation is not performing normally, like cannot make
pairing/outgoing calls etc, try to make a SOFT-RESET by removing the face panel
from the unit and wait about 1 minute.Then re-attach the face panel and try the
bluetooth operation again. Or reset the whole unit by pressing the RESET button
(22) behind the panel (warning all the stored memory will resume to factory default).
REJECTING AN INCOMING CALL
Press button (2) “CLEAR” to reject the incoming call.
NOTE:The audio output of the present mode will be muted and the ringing tones will
be heard if an incoming call is not being answered.After pressing button (2) “CLEAR”
the mute of the present mode will be released.
OUTGOING CALL
MAKING AN OUTGOING CALL
1.Press the volume knob (8) to start making an outgoing call.A cursor is blinking.
2.Rotate the volume knob to navigate through the numeric 0-9, # and +.
3. Press the volume knob to confirm the selected numeric.
4. Use the track up/dpown buttons (20) to move the cursor back or forward to the
wrong input numeric.
5. If the phone number has been entered completely, press the volume knob (8) for
longer than 3 seconds or press button (9) “MODE” shortly to start dailing the call.
The unit will display “CALLING >>”.
NOTE: If you need to enter any number under the calling mode, for example a Pin
Code or Service Number Dial input. Press the volume knob (8) to enter the numeric
input interface, then rotate the volume knob to navigate through the numeric. Press
the volume knob again to confirm the selected numeric. Press the volume knob
longer than 3 seconds to exit the numeric interface.
The audio output of the present mode will only be muted after pressing the volume
knob (8) as confimation to dial.
6.The unit will display the duration “PHONE >> 00:06” of the conversation.
7.Use the volume knob (8) to adjust the volume level.
8.Press button (2) “CLEAR” to end the conversation. the unit will automatically
switch to the previous mode and release the mute of the previous mode at the
same time.
9. If the Ignition is being turned “OFF” during the talking mode, the unit will keep the
conversation. Press button (2) “CLEAR” to switch off the unit after finished the
conversation.
CALL TRANSFER
TO AUDIO TRANSFER FROM HEAD UNIT BACK TO THE MOBILE PHONE
Press button (9) “TRANSFER” during the talking mode to transfer the audio from the
unit back to the mobile phone (for privacy reason).The unit will display “TRANSFER
<-->” for 3 senconds.
NOTE: - After pressing button (9) “TRANSFER” the mute of the present mode will be
released at the same time.
- When making an outgoing call, it’s not possible to CALL TRANSFER if the call
is not
answered yet. It’s possible to Transfer the call to mobile phone after the
call is answered.
- Depending on different types of mobile phones, the time for activating the
CALL TRANSFER mode is different. For example a Nokia mobile phone usually
takes 3-5 seconds after pressed button (9) “TRANSFER” for audio transfer or
forth through unit to mobile phone.
ENGLISH
8
IPOD INFORMATION ON THE HEADUNIT DISPLAY
Press button (10) “AS/PS” repeatedly while the iPod song is playing, the unit will display:
Song -> Artist -> Album name -> Elapsed time
SEARCHING A DESIRE SONG
Press button (2) “BAND” to go into the iPod searching Mode. Pressing button (2)
“BAND” repeatedly to access the following searching methods: 1. Playlist -> 2.Artist
-> 3.Album -> 4. Song -> 5. Genre
Press within 10 seconds button (8) to confirm and access the searching mode, then
rotate button (8) volume knob to navigate through the Album,Artist or Song list on the
iPod. Press button (8) to confirm and play the selected song. Press button (10) “AS/PS”
during the searching mode as quick move back to the last upper level of Album, Playlist,
Genre etc.
SONG SELECT
During iPod operations, press button (20) “ ” for next track. Press button (20)
“ ” for previous track.Tracknumber shows on display.
During iPod operation, hold button (20) “ ” for fast forward. Hold button (20)
“ ” for fast reverse. iPod song will starts play from when you release the button.
SONG REPEAT/REPEAT ALL
Press button (14) “RPT” to continuously repeat the same track. Press it again to stop repeat.
Press button (14) “RPT” for more then 3 seconds to repeat all songs of the current album.
SHUFFLE PLAY/SHUFFLE ALBUM
Press button (15) “RDM” to play all songs in random order. Press again to cancel the
function.
Press button (15) “RDM” for more then 3 seconds to play all songs of the current album
in random order. Press again to cancel the function.
BLUETOOTH HAND FREE OPERATION
2. Reject incoming call
Edit number
Clear
8. Enter phone number input mode
Confirm dailing the input phone number
Use for numeric input
9. Transfer phone conversation backward to mobile phone
18. Blue-tooth multi-function key (Pairing / Re-connection etc.)
20. Move cursor
Edit number
23. Microphone
Please read this part of the user-guide to establish a connection with your mobile
phone. Please note: you need to have a phone with Bluetooth capability. This device
utilizes Bluetooth wireless technology version V1.2 that supports Bluetooth headset
and/ or Handsfree profile. See our website (www.caliber.nl -> headunits -> MCD 370)
for the updated list with examples of bluetooth mobile phones available on the market.
If you mobile phone is not on the list, please try it out in practice.The phone can be in
your pocket or your bag while handling in- and outgoing calls (Max 3m distance).
PAIRING
This option can be used to pairing the unit’s Blue Tooth system to your mobile phone
or other Blue Tooth device.
1.Check your mobile phone’s user guide and find out how to turn on the Bluetooth
function.
2.Press menu button (18) till “PAIRING:1” is displayed.Then press button (8) again to
select.
3.To terminate the pairing, you can press button (2) “CLEAR” at any time.
4.Select the Blue Tooth set up on the mobile phone.
5.“BT60” will appear in the pairing list on the mobile phone.You have to select “BT60”
and enter the password “1234” (default). If the pairing is succesfull, the unit will display
“PAIRING:1 V” and the mobile phone name. If the pairing failed, the unit will display
“PAIRING:1 X” for 3 seconds and it will switch back to the previous mode automatically.
NOTE:- Keep the mobile phone within 2 meter from the unit during pairing.
- Please make sure the phone battery is fully charged when making the pairing or re-
connection.
- Please always try pairing the mobile phone a few minutes after the mobile phone was
switched “ON” to ensure the best pairing results.
- Only power, clear, volume knob or mute are functional during pairing.
RE-CONNECTION
This option can be used to Re-connect the paired mobile phone or Blue tooth device
manually.
1.Press menu button (18) till “RE-CONN” is displayed.Then press button (8) to
