Bedienungsanleitung Caliber MCD610 (Seite 7 von 12) (Englisch)

497358

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

EN-7

OPERATIONS

Turning the unit ON/OFF ( )

Press “

” button to turn on unit. To turn off, press the button again.

Selecting a source (MODE)

Press

MODE repeatedly to switch between TUNER, AUX IN, USB or SD/MMC mode.

Adjusting Volume

• Head Unit: Rotate

VOL knob right or left to increase or decrease volume.

• Remote Control: Press

VOL+ or VOL- to increase or decrease volume.

Mute Button

• Head Unit: Press

MUTE button to mute the sound at once. Press again to return to previous volume level.

• Remote Control: Press

button.

Loud Button (LD)

Press and hold

LD button to turn on/off LOUD feature.

Equalizer (EQ)

Remote: Press EQ button. Under Dsp-preset, select the desired EQ by pressing ( / ).

CLOCK

To show clock, switch to RADIO mode and press CLK on remote control.

How to Set Clock

1. Press and hold

MENU on remote control.

2. Using navigation key on remote, select

UTIL function.

3. Press and hold

CLK button. Hour start ashing.

4. Press (

/ ) on remote to set the hour. When done, press CLK button again to set minutes.

5. Press (

/ ) to set the minutes.

6. Press

X to save and exit.

DUAL SETTINGS

DUAL is a feature that lets user listen to radio while the passenger at the back can watch video. This unit supports

connection of external AV device such as portable TV through the AUDIO OUT and VIDEO OUT port.

1. Connect the AUDIO OUT and VIDEO OUT port at the back of head unit to the LINE IN of external AV device.

2. Press and hold

MODE. Select memory card or USB source.

3. Press

DUAL key on remote control to select which mode you want to control.

T = TUNER, C = CARD, U = USB

Note: You will need to connect an external portable TV or monitor when using this feature.

RESET

Reset button is placed on the housing. To reset, use a sharp point object and press and hold the RESET button for 2

seconds.

The reset button is to be activated for the following reason:

• Initial installation of the unit when all wiring is completed.

• All the function buttons does not operate.

• Error symbol on the display.

LISTENING TO RADIO

Band (BD)

Pressing this key repeatedly will toggle cyclically between each band. FM1---FM2---FM3.

Automatic or Manual tuning (SEEK + / SEEK –)

When pressed short, these keys are operated as MANUAL tuning

mode.

When pressed longer than 1 sec., they are operated as AUTOMATIC

tuning mode.

Auto Seek/Preset scan (A/PS)

Preset Scan (PS) - By pressing shortly, the radio plays each preset

station for 5 seconds.

Auto Seek (AS) - By pressing longer than 1 sec, auto seek is activated.

The 6 strongest stations are preset and stored in the corresponding

preset number. When Auto Seek operation is nished, the radio

executes the preset scan.

Preset Memory Station 1-6

Currently Tuned Station

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber MCD610 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber MCD610

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info