Bedienungsanleitung Caliber RCD212BTI (Seite 1 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

536912

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Description of the functions

Panel Release Push this button to release the frontpanel.

Eject Push this button to eject the CD out of the unit.

Power Power function to activate or deactivate the unit.

Band Band selection allows you to select different reception bands, f.i. FM1, FM2, FM3 and AM1, AM2

AF AF stands for Alternative frequencies; the tuner will return to alternative frequencies whenever the reception signal is getting worse.

TA TA stands for Trafc announcement which means that it will give you information about the trafc (if broadcasted) no matter what mode you are in (SD,USB, etc.) it will automatically interrupt the sd/

USB and give the information, after that it automatically switches back to the selected mode

Manual up/down Long press to move the radio frequency number up/down step by step.

Menu (system) Press the VOL/SEL button for several seconds to activate the cyclical mode to choose from the following user instructions: AF ON/OFF >TA SEEK/ALARM > PI SOUND/MUTE > RETURN S/L >

MASK ALL/DPI (rotate to adjust).

Audio Menu The Audio menu button gives you the possibility to adjust your sound system with the following options Bass, Treble, Balance and Fader. These options can be used to ne tune your sound.

In EQ mode you can choose from preset EQ settings: FLAT, CLASSIC, POP, ROCK

Tel Hold the BND/TEL button to enter the phone mode. Here you can dail a phone number using the 0~9 and # buttons on your remote.

Mode The mode button allows you to go from one source to another source (f.i. Tuner) by pushing the button as many times as needed.

Rotary volume This knob allows you to adjust the volume from minimum to maximum level. NOTE high sound levels may cause damage to your ears.

M1-M6 These are the preset stations where you can store your favorite radio stations if in tuner mode.

Pause/Play This button allows you in USB or SD mode to play or to pause the music.

Scan Scan will play 10 seconds of each song on the USB or SD. If the preferred song is playing, push again and it will play that song.

Repeat Repeat will play a selected song or album continuously. Available in USB and SD mode.

Shufe Shufe will play all the songs random. Available in USB and SD mode.

File down/up In MP3 mode press this button to go up or down one folder.

Track down/up In MP3 mode press this button to go up or down one track

fast forward/backward Long press to fast forward to the USB or SD.

3,5mm AV jack in To connect an external audio system.

USB poort When inserting a USB stick the unit will switch to USB mode.

SD card input (behind panel) Remove the frontpanel to insert SD card. When inserting a SD card the unit will switch to SD mode. (Max 32GB card)

Reset (behind panel) Use a non-metallic pointed object to press and hold the reset button for 5 seconds. The unit will be set to factory default.

Bluetooth

Pairing Activate Bluetooth on your mobile phone and search for available devices. Select “CALIBER”, password “0000”. If succesfull connected the BT-icon with the word ‘Phone’ is displayed on the headunit.

The unit will go back to the previous mode.

Reconnect The unit will normally auto-reconnect.

Answer incomming call Press the ”MOD/TA” button to answer the call.

Reject incomming call Press the ”F/PS” button if you not wish to answer the call.

A2DP Audio streaming

Go to BT MUSIC-mode using ”MOD/TA” button. Start playing music on your mobile device. The 12, 7 and 8 buttons on the headunit can be used to operate your mobile device.

Key System Tuner CD/MP3/WMA BT Audio Bluetooth

Short press long press Short press long press Short press long press Short press long press Short press long press

1 Power Power off

2 Rotary Volume

3 Menu (audio / system) Enter

4 Panel release

5 LCD display

6 USB port

7 Mode Mode Mode Answer

incomming call

Transfer

conversation to

mobile phone

8 Mute

9 Band

10 Seek down Manual down Track down fast backward Track down

11 Seek up Manual up Track up fast forward Track up

12 Scan Reject incoming

call/end call

13 3,5mm AUX In Jack

14 M1 Store M1 Play/Pause Play/Pause

15 M2 Store M2 Intro

16 M3 Store M3 Repeat

17 M4 Store M4 Shufe

18 M5 Store M5 Folder down

19 M6 Store M6 Folder up

20 PTY

21 TA

22 AF

23 Display (CLK)

24 Tel

25 Eject

26 Disc slot

141272320 15 16 17 18 19 13

4 2526 2221 5

iPod/iPhone operation

Connect Connect your iPod or iPhone with the original USB cable (supplied with the Apple device) to the USB port on the head unit. Note: iPad is NOT supported.

Control Once connected playback will start automaticly. You can use the play/pause button on the head unit to control the device.

Browse Press the F/PS button to view: PLAYLIST, ARTIST,ALBUM, GENRE, SONGS, COMPOSER, AUDIO BOOK or PODCAST (rotate VOL button to scroll). Press the VOL button to conrm and rotate for

futher selection (short press of the VOL button is to conrm).

Detach Unplug the USB cable at any time to eject your iPod/iPhone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber RCD212BTI Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber RCD212BTI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info