Bedienungsanleitung Caliber RCD234BT (Seite 15 von 23) (Englisch)

699166

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Owner’ Manual

RDS Operation

(Optional)

RDS Function

RDS ( Radio Data System) service

availability varies with areas. Please

understand if RDS service is not

available in you area, the following

service is not available, either.

1. AF-ALTERNATIVE FREQUENCY

a. In RDS mode, press the AF button

on the panel to turn the AF function

on or off. When the Radio signal

strength is poor, enabling the AF

function will allow the unit to same PI

(Program Identification) as the cur-

rent station but with stronger signal

strength, so that you do not have

to retune the stations when driving

between different transmitter cover-

age areas. When AF symbol is on, it

means RDS information is received;

when AF symbol is flashing, it means

RDS information is not yet received.

PS (Program Service name): the

name of statin will be display instead

of frequency.

If RDS service is not available in

your area, turn off the AF mode.

Dufault setting is ON.

b. In RBDS mode, no AF function.

2. TA - TRAFFIC ANOUNCEMENT

Press and hold the TA button so that

the unit will be activated for reception

of traffic announcement from local ra-

dio stations.

To choose the TA mode, press the

sound select button for 2 seconds, the

display will show TA SEEK. Rotate the

encoder volume to choose between

the TA SEEK and TA ALARM, after

chooisng, please leave the unit idle

for the mode to activate. In TA SEEK

mode, the unit will seek for traffic an-

nouncement programme when TA is

pressed; in TA ALARM mode, no TA/

TP is displayed and the alarm is set

off.

3. PTY - PROGRAMME TYPE

This radio will allow you to select the

type of programme required, and will

search for a station broadcasting that

type of programme. Press and hold

the PTY button once to show the

music type. Then press 1-6 button

to choose the different music types

available.

Press the PTY button twice to show

the speech type programme. Then

press 1-6 button to choose the differ-

ent speech type programme. Each

number keye will show 3 different

speech programme for you to choose.

4. MASK DPI - MASK ALL

Press the sound select button for 2

seconds, the display will show TA

SEEK. Press the sound select button

again so that the unit will show MASK

DPI. Rotate the encoder volume to

toggle between MASK DPI and MASK

ALL mode. Then leave the unit idle for

the mode to take effect. During MASK

DPI mode, the unit will mask only

the AF which has different PI, this is

the default mode; during MASK ALL

mode, the unit will mask the AF which

has different PI and no RDS signal

with high field strength.

5. RETUNE S/L - SHORT/LONG

This function is to set the initial dura-

tion of automatic TA Search -- Press

and hold the sound select button un-

til “TA SEEK” is shown on the LCD,

then press the SEL button to cycle

through the menu selections until

“RETUNE_S” is shown, use the VOL

+/- button to choose “RETUNE_S”

or “RETUNE_L”. The default is “RE-

TUNE_S”.

6. TA VOL

This function is to set the TA volume,

the default level is 25.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber RCD234BT Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info