Bedienungsanleitung Caliber RCD234DBT (Seite 13 von 18) (Englisch)

699168

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Owner’ Manual

Radio Operation

Owner’s Manual

1. Choose Radio Band

Press the BND Button anytime to ac-

cess the radio function.

The unit comes with five bands- three

FM Bands (FM1, FM2, and FM3) and

two AM Bands (AM1, and AM2). Each

of the five bands can store up to six

preset stations, for a total of 30 preset

memory stations.

2. Radio Tune / Seek Function

In Radio Mode, press and hold the

“>>| ” or “|<<“, manual seek will be

activated and the radio frequency will

proceed by one step.

Press the SEEK |<< or >>| Button

once, and the radio will seek the next

strong and clear frequency station.

Repeat to seek more stations in your

listening area with a strong signal.

3. Mono / Stereo Reception Control

In FM radio mode, Press SEL But-

ton repeatly until the display shows

‘MONO’ or “STEREO”. Roate the Vol

button to choose the reception con-

trol, the word “MONO” shown on the

screen indicating the mono reception

is received.

4. Save Your Preset Stations

There are six numbered preset but-

tons which can store and recall sta-

tions for each band. While listening to

a radio station you would like to save

as a pre-set, press and hold one of

the buttons numbered 1-6 until the

preset station number is shown. The

button you pressed is now the pre-set

button for that station.

5. Automatic Store / Preset Scan

A. Automatic Scan & Store

While listening to the FM Radio, press

and hold the F/PS Button for 3 sec-

onds. The receiver will automatically

scan and save the station listening

to.

While listening to the AM Radio, press

and the F/PS Button for 3 seconds.

The receiver will automatically scan

and save the station you are listen-

ing to.

B. Scan Saved Stations

Press the F/PS button once to per-

form the scanning functions. In FM

mode, press the F/PS button and

the stations in that FM band will

be scanned; press the button in AM

mode and scan the band stations of

that AM Band.

6. Local / DX

Press SEL Button repeatly until the

display shown “LOC”. Rotate the VOL

button to choose “LOC ON“ or “LOC

OFF”.

a. “LOC ON” showing on the display,

means local reception is turned on;

b. “LOC OFF” showing on the display,

means distant reception is turned on.

Local and distance reception set-

ting can facilitate the radio reception,

depending on the location in which

the radio is being used.

7. DAB Function

This device is equiped with DAB

function. Press MOD to cycle to DAB

mode. Press F/PS to scan all the

radio stations. When a station is lis-

tening, press BND to show the follow-

ing information of the station:

a. Name;

b. Type;

c. Code information;

d. Frequency;

e. Date;

f. Signal strength.

Long press the Volume knob to show

the DAB time synchronization with the

system.

Radio Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber RCD234DBT Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info