Bedienungsanleitung Caliber RCD234DBT (Seite 14 von 18) (Englisch)

699168

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Owner’ Manual

RDS Operation

(Optional)

RDS Function

RDS ( Radio Data System) service

availability varies with areas. Please

understand if RDS service is not

available in you area, the following

service is not available, either.

1. AF-ALTERNATIVE FREQUENCY

a. In RDS mode, press the AF button

on the panel to turn the AF function

on or off. When the Radio signal

strength is poor, enabling the AF

function will allow the unit to same PI

(Program Identification) as the cur-

rent station but with stronger signal

strength, so that you do not have

to retune the stations when driving

between different transmitter cover-

age areas. When AF symbol is on, it

means RDS information is received;

when AF symbol is flashing, it means

RDS information is not yet received.

PS (Program Service name): the

name of statin will be display instead

of frequency.

If RDS service is not available in

your area, turn off the AF mode.

Dufault setting is ON.

b. In RBDS mode, no AF function.

2. TA - TRAFFIC ANOUNCEMENT

Press and hold the TA button so that

the unit will be activated for reception

of traffic announcement from local ra-

dio stations.

To choose the TA mode, press the

sound select button for 2 seconds, the

display will show TA SEEK. Rotate the

encoder volume to choose between

the TA SEEK and TA ALARM, after

chooisng, please leave the unit idle

for the mode to activate. In TA SEEK

mode, the unit will seek for traffic an-

nouncement programme when TA is

pressed; in TA ALARM mode, no TA/

TP is displayed and the alarm is set

off.

3. PTY - PROGRAMME TYPE

This radio will allow you to select the

type of programme required, and will

search for a station broadcasting that

type of programme. Press and hold

the PTY button once to show the

music type. Then press 1-6 button

to choose the different music types

available.

Press the PTY button twice to show

the speech type programme. Then

press 1-6 button to choose the differ-

ent speech type programme. Each

number keye will show 3 different

speech programme for you to choose.

4. MASK DPI - MASK ALL

Press the sound select button for 2

seconds, the display will show TA

SEEK. Press the sound select button

again so that the unit will show MASK

DPI. Rotate the encoder volume to

toggle between MASK DPI and MASK

ALL mode. Then leave the unit idle for

the mode to take effect. During MASK

DPI mode, the unit will mask only

the AF which has different PI, this is

the default mode; during MASK ALL

mode, the unit will mask the AF which

has different PI and no RDS signal

with high field strength.

5. RETUNE S/L - SHORT/LONG

This function is to set the initial dura-

tion of automatic TA Search -- Press

and hold the sound select button un-

til “TA SEEK” is shown on the LCD,

then press the SEL button to cycle

through the menu selections until

“RETUNE_S” is shown, use the VOL

+/- button to choose “RETUNE_S”

or “RETUNE_L”. The default is “RE-

TUNE_S”.

6. TA VOL

This function is to set the TA volume,

the default level is 25.

Owner’s Manual

1. Choose Radio Band

Press the BND Button anytime to ac-

cess the radio function.

The unit comes with five bands- three

FM Bands (FM1, FM2, and FM3) and

two AM Bands (AM1, and AM2). Each

of the five bands can store up to six

preset stations, for a total of 30 preset

memory stations.

2. Radio Tune / Seek Function

In Radio Mode, press and hold the

“>>| ” or “|<<“, manual seek will be

activated and the radio frequency will

proceed by one step.

Press the SEEK |<< or >>| Button

once, and the radio will seek the next

strong and clear frequency station.

Repeat to seek more stations in your

listening area with a strong signal.

3. Mono / Stereo Reception Control

In FM radio mode, Press SEL But-

ton repeatly until the display shows

‘MONO’ or “STEREO”. Roate the Vol

button to choose the reception con-

trol, the word “MONO” shown on the

screen indicating the mono reception

is received.

4. Save Your Preset Stations

There are six numbered preset but-

tons which can store and recall sta-

tions for each band. While listening to

a radio station you would like to save

as a pre-set, press and hold one of

the buttons numbered 1-6 until the

preset station number is shown. The

button you pressed is now the pre-set

button for that station.

5. Automatic Store / Preset Scan

A. Automatic Scan & Store

While listening to the FM Radio, press

and hold the F/PS Button for 3 sec-

onds. The receiver will automatically

scan and save the station listening

to.

While listening to the AM Radio, press

and the F/PS Button for 3 seconds.

The receiver will automatically scan

and save the station you are listen-

ing to.

B. Scan Saved Stations

Press the F/PS button once to per-

form the scanning functions. In FM

mode, press the F/PS button and

the stations in that FM band will

be scanned; press the button in AM

mode and scan the band stations of

that AM Band.

6. Local / DX

Press SEL Button repeatly until the

display shown “LOC”. Rotate the VOL

button to choose “LOC ON“ or “LOC

OFF”.

a. “LOC ON” showing on the display,

means local reception is turned on;

b. “LOC OFF” showing on the display,

means distant reception is turned on.

Local and distance reception set-

ting can facilitate the radio reception,

depending on the location in which

the radio is being used.

7. DAB Function

This device is equiped with DAB

function. Press MOD to cycle to DAB

mode. Press F/PS to scan all the

radio stations. When a station is lis-

tening, press BND to show the follow-

ing information of the station:

a. Name;

b. Type;

c. Code information;

d. Frequency;

e. Date;

f. Signal strength.

Long press the Volume knob to show

the DAB time synchronization with the

system.

Radio Operation

Caliber RCD234DBT Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info