Bedienungsanleitung Caliber RCD272BTI (Seite 5 von 18) (Englisch)

536913

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

RCD 272BTi manual

Radio Data System

This unit has a built-in “Radio Data System”

decoder system that supports broadcast

stations transmitting “Radio Data System” data.

When using the “Radio Data System” function,

always set the radio to FM mode.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

* The factory default setting is ON.

1. Set to system setup by long pressing [DISP]

button.

2. Press the [

] or [ ] button to select “AF”.

3. Rotate the [VOLUME] knob to select ON or

OFF.

•AFON:

“AF” indicator appears in the display and AF

function turns on.

•AFOFF:

“AF” indicator disappears in the display and

AF function turns off.

REG (Regional programme) function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for that

region is received.

* The factory default setting is ON.

RADIO DATA SYSTEM OPERATIONS

Notes:

• This function is disabled when a national

station such as BBC R2 is being received.

• The REG function ON/OFF setting is valid

when the AF function is ON.

1. Set to system setup by long pressing [DISP]

button.

2. Press the [

] or [ ] button to select

“REG”.

3. Rotate the [VOLUME] knob to select ON or

OFF.

Manually tuning a regional station in the

same network

This function is valid when the AF function is

ON and the REG function is OFF.

Note:

This function can be used when a regional

broadcast of the same network is received.

TA (Trafc Announcement)

In the TA standby mode, when a traffic

announcement broadcast starts, the traffic

announcement broadcast is received as top

priority regardless of the function mode so

you can listen to it. Traffic programme (TP)

automatic tuning is also available.

* This function can only be used when “TP”

appears in the display. When “TP” appears,

this means that the “Radio Data System”

broadcast station being received has traffic

announcement programmes.

Setting the TA standby mode

If you press the [TA] button, “TA” lights in the

display and the unit is set into the TA standby

mode until a trafc announcement is broadcast.

When a trafc announcement broadcast starts,

“TRAF INF” appears in the display. If you press

the [TA] button while a traffic announcement

broadcast is being received, the traffic

announcement broadcast reception is cancelled

and the unit goes into the TA standby mode.

Cancelling the TA standby mode

As “TA” lights in the display, press the [TA]

button. The “TA” in the display goes off and the

TA standby mode is cancelled.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type even

if the unit is on a function mode other than radio.

* Some countries do not yet have PTY

broadcast.

* In the TA standby mode, a TP station has

priority over a PTY broadcast station.

Selecting PTY

Press [MENU / ] button, then rotate the

[VOLUME] knob to select PTY type, press the

[VOLUME] knob, the unit begin searching.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber RCD272BTI Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber RCD272BTI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info