Bedienungsanleitung Caliber RDD843BT (Seite 15 von 21) (Englisch)

497376

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Bluetooth Operations

1. When user use our Bluetooth HEAD UNIT, please make sure the mobile

phone you use must/does support Bluetooth functions (Headset or

Handsfree profiles or both)

2. Before you start to use our Bluetooth HEAD UNIT, please make sure

complete pairing with your mobile phone first. Please refer to the user

manual, section “PAIRING” for detail “PAIRING” instruction. To ensure the

best reception for Pairing or Re-connection, please make sure the Phone

Battery is fully charged when making the Pairing or Re-connection.

3. Please always try pairing the Mobile Phone with Head unit after a few minutes

of the Mobile Phone was Switched On to ensure the best pairing result.

4. “ Caliber ” is this unit device model number which is displayed on the mobile

phone.

5. To achieve the best performance, please always keep the Mobile Phone

within 3 meters of the Head unit.

6. Please always keep a clear path between the Mobile Phone & the Head unit.

7. Never put any metal object or any obstacle between the path of the Mobile

Phone & the Head unit.

8. Some brand of Mobile Phone like Sony Ericsson may have "Power Saving

Mode" selection when Bluetooth mode is switched on. PLEASE DO NOT

Switches ON Power saving Mode when operating with this Head Unit, as

some abnormal communication behavior will happen occasionally if Power

Saving Mode is switched on.

9. Before user make Outgoing call or Incoming call, make sure the mobile

phone's “Bluetooth function” was switched “ON”.

10. To ensure the best conversation quality / performance, please always

keep talking within 1 meter of the Head Unit.

11. If user want to Dis-connect the Head unit with the Mobile Phone, please

switch “OFF" Bluetooth connectivity on the Mobile Phone,or go to the

system menu, "dis-connect" to disconnect the bluetooth connectivity

manually. ( please refer to the user manual, section "dis-connection of the

bluetooth system for details instruction. )

12. Some Mobile Phones can support “IN BAND RING TONE”, such as Nokia.

In such case, the Incoming Ringing Tone will be same as the original Ring-

tone of the Mobile Phone. But some Mobile Phones like Sony Ericsson do

not support this feature. The Ring-tone will be using the standard Ring-

tone of the Head unit.

13. When in telephone mode, during talking, it is highly recommended to set

the volume to below “30” in order to achieve the best sound quality. As if

the volume is too high, it may create unwanted echo inside the car, and

this unwanted echo may feedback into the microphone.

14. If the Bluetooth related operation is not performing normally, like cannot

make pairing, cannot making an outgoing call, User can try to make a

SOFT-RESET of the Bluetooth module by removing / detaching the panel

from the main unit and waiting for about 1 min. Then re-attach the panel to

the unit & retry the Bluetooth operation again. Or user can RESET the

whole unit by pressing the RESET button behind the panel.

By pressing the RESET button all the stored memory will resume to

factory default.

Q: Under phone conversation, if the voice output from the car's speakers

is not loud enough.

A: Try increase the volume level of the head unit to a suitable sound level

Q: Under phone conversation, the “Listener” cannot hearing my voice loud

enough

A: First, try asking the 'Listener” increase the volume level on his/her mobile

phone, if still not loud enough, try to increase your mobile phone's volume.

Q: Under Phone conversation, the “Listener' can hear echo feedback.

A: Your unit's speaker volume level is too loud which cause the voice

feedback into the built-in microphone, this can be corrected by decreasing

the volume level.

Q: Under Phone conversation, the “Listener' complain the background is

too noisy

A: May be you are in a noisy environment. Try close the car's window to shield

the environment / background noise under phone conversation.

Q: If the Mobile Phone already paired with the headunit, but after several

calls, the incoming calls cannot access thru the headunit.

A: May be the paired Mobile Phone lost the Bluetooth connection with the

headunit. in this case, please go to the "MENU" & select "re-connect" to

reconnect the headunit with the paired Mobile Phone. For details, please

refer to the MENU operation "re-connection”.

User Guide For Bluetooth

Frequency Asking Questions

E - 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber RDD843BT Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caliber RDD843BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info