Bedienungsanleitung Calor gv 7260 (Seite 20 von 134) (Alle Sprachen)

323957

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

o transport your steam generator using the handle of the iron :

- place the ironin positionon the housingplate onthesteam generator and fold the ringover the

iron until it locks into position (you will hear a “click”) - fig.2.

Hold the iron by the handle to transport your steam generator - fig.1.

What water may be used ?

• Your iron has been designed to operate using untreated tap water.

• Heat concentrates the elements contained in water during evaporation. The types of water

listed below contain organic waste or mineral elements thatcan cause spitting, brownstaining

or premature wear of the appliance: water from clothes dryers, scented or softened water,

water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or

rain water should not be used in your iron. Also do not use boiled, filtered or bottled water.

f your water is very hard(check

with your local water authority)

it is possibleto mix untreated

ap water with store-bought

distilled ordemineralised water

in the following proportions:

50% untreatedtap water,50%

distilled ordemineralised water.

Preparation

Filling the water tank

• Place the steam generator on a stable, horizontal and heat-resistant surface.

• Ensure that your steam generator is unplugged and that the soleplate and the iron rest have

cooled down.

• Open the water tank filler cover - fig.4.

• Pour in untreated tap water up to the max mark - fig.5.

• Close the water tank filler cover.

• Your iron is equipped with an extension cord system to prevent the cord from dragging over

the laundry and creasing it again when ironing.

• Take the steam cord out of its housing and unwind it completely.

• Remove the tie to release the cord outlet.

• Press the Eject button - fig.6 and the Easycord system extends automatically.

• When the cord outlet tips, the Easycord system extends automatically without you having to

press the Eject button.

Using the Easycord system

Operating the control panel

• Green light flashes: the boiler heats up. - fig.7.

• Green light on: the steam is ready - fig.7.

• Red light “water tank” on: the water tank is empty - fig.10.

• The orange “anti-calc” indicator flashes - fig.12: you need to rinse the scale collector.

Switch on the steam generator

• Completely unwind the power cord and the steam cord from its storage space.

• Lower the retaining hoop (depending on model) to unlock the safety catch - fig.3.

• Plug your steam generator into a mains socket with an earth pin”.

• Press on the on / off switch. The green light (located on the control panel) flashes and the

boiler heats up - fig.7.

When the green “steam ready” light stops flashing (after 2 minutes approximately), the

appliance is ready.

The first time the appliance is

used, there may be some

fumes and smell but this is

not harmful. They will not

affect use and will disappear

rapidly.

Steam ironing

• Placetheiron'stemperaturecontrolslideaccordingtothetypeoffabrictobeironed (seetablebelow).

• The thermostat light comes on. Be careful ! The steam generator is ready when the thermostat

light goes out and when the green “steam ready” light stays on.

• Adjust the steam output control dial (located on the control panel).

• While ironing, the light on top of the iron and the steam ready light turn on and off, as the

temperature adjusts without interrupting ironing.

• To obtain steam, press on the steam control button under the iron handle and keep it pressed -

fig.8. The steam will stop when you release the button.

• When starting, and regularly while it is being used, your steam generator's electric pump injects

waterinto the boiler. It makes a noise but this is quite normal. You may also heara clicking noise

which is the steam valve opening. Again this is normal.

• Always spray starch onto the reverse side of the fabric to be ironed.

Use

Do not place the iron on a

metal support.When

taking a break from

ironing, always place

the iron on the iron rest

plate of the unit. It is

equipped with non-slip

pads and has been

designed to withstand

high temperatures.

Always use the Easycord

system for enhanced

comfort of use.

Ironing Boards:

ue to the powerful steam

output, a mesh type ironing

board must be used to allow

ny excess steam to escape

and to avoid steam venting.

1800115593 TEFAL ExpressAnticalc:1800115593 5/02/09 11:36 Page 20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Calor gv 7260 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Calor gv 7260

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info