Bedienungsanleitung Cambridge 751RV2 (Seite 5 von 40) (Englisch)

581025

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

751R V2azur

ENGLISH

1 Standby/On

Switches the unit between Standby mode (indicated by a dim power LED)

and On (indicated by a bright power LED). Standby is an eco-friendly <0.5W

low power mode. The unit may be left in Standby mode when not in use.

2 Phones

Allows for the connection of stereo headphones with a 6.35mm/¼" Jack

plug. Headphones with an impedance of between 32 and 600 ohms are

recommended.

Note: Plugging in headphones will automatically mute the main and pre-amp

outputs and select a Dolby Headphones output to be created for headphone

use.

3 Tuning +/-

Used to tune FM/AM frequencies and skip presets for the built-in Tuner.

4 Mode/Store

Press to cycle between Tuner modes. Press and hold for storing presets

(refer to the 'Operating Instructions' of this manual for more information).

5 Infrared sensor

Receives IR commands from the supplied remote control. A clear,

unobstructed line of sight between the remote control and the sensor is

required.

6 Display

Displays the status of the unit.

7 Tuner FM/AM

Press to select the tuner. Once in Tuner mode press to switch between FM

and AM modes.

Note: The 751R V2 remembers the audio and video input type and

processing mode for each individual source input. These are recalled each

time a source is selected.

8 HDMI Preview

Press to see the previews of different HDMI sources connected to the unit.

Use the remote control navigational button or use the Tuning +/- to navigate

and press the Mode/Store button to activate the chosen preview display.

9 USB

Press to select the USB Audio source connected to the USB input at the back.

10 BD/DVD

Press to select the source equipment connected to the BD/DVD input.

11 Video 1

Press to select the source equipment connected to the Video 1 input.

12 Video 2

Press to select the source equipment connected to the Video 2 input.

13 Recorder 1

Press to select the source equipment connected to the Recorder 1 input.

14 Aux/TV

Press to select the source equipment connected to the Aux input.

With ARC enabled (see later section), press again to select Audio Return

Channel from a suitable TV.

15 CD

Press to select the source equipment connected to the CD input.

16 Recorder 2

Press to select the source equipment connected to the Recorder 2 input.

17 Audio input type

Press this button to select between analogue, digital (optical/coaxial) or

HDMI input types as the source of the audio for the currently selected source

input.

The choices available depend on the inputs that have been assigned to that

source, see later section.

18 Stereo modes

Press to listen to a source in either digitally processed stereo or stereo and

sub modes.

19 Surround modes

Press to select Dolby Digital or DTS surround modes (with suitably encoded

digital source material), or various Dolby Pro Logic II/IIx/IIz, DTS Neo:6

modes for matrix encoded analogue or digital material.

Post-processing of digital surround types with Dolby Pro Logic IIx/IIz or Neo:6

is also possible. See later decode mode tables for details.

20 Picture adjustment

Press to select various picture adjustments for sources that have the Scaler

set to Process only (see 'Source setup' section in the manual). An adjustment

bar will appear on the TV for the current item (Brightness, Contrast etc.)

Press the Pic. Adj. button again to move to the next item.

Use the volume knob to adjust the level of the current parameter.

Note: For source material, the scaler cannot process (such as deep colour or

3D content). Pic. Adj. will have no effect.

This button is also used to change the scaler output resolution. Press and

hold the button for 10 seconds and the current output resolution will appear

on the 751R V2's front panel display. Keep holding the button down and the

751R V2 will change to the next available resolution and show it on the front

panel display. See later section.

1 2 3 4 5

17 18 19 20 21

9 10 11 12 13 14 15 16

23 24

7 8

Front panel controls

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge 751RV2 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge 751RV2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info