Bedienungsanleitung Cambridge Audio AXA35 (Seite 9 von 10) (Englisch)

699770

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

AXA35

Troubleshooting

THERE IS NO POWER

• Ensure the AC power cord is connected securely.

• Ensure the plug is fully inserted into the wall socket and is switched on.

• Check fuse in the mains plug or adaptor.

• Check the power is on at the front of the unit.

THERE IS NO SOUND

• Check the correct input is selected.

• Check that the speakers are connected correctly.

• Check the unit is not in mute mode.

THE SOUND IS DISTORTED

• Check speaker connections.

THERE IS A HUM COMING FROM THE SPEAKER

• Ensure that all cable connections are secure, particularly ground/shield

connections for turntables.

THERE IS UNWANTED BACKGROUND NOISE AND

INTERFERENCE

• Move the unit away from other electrical equipment that is likely to cause

interference.

• Ensure that all cable connections are secure, particularly ground/shield

connections for turntables.

THE REMOTE HANDSET WILL NOT FUNCTION

• Check that the batteries are the correct way around and have not expired

• Ensure that nothing is blocking the remote sensor.

If you experience any trouble with your product, visit the help section on

our webpage at https://techsupport.cambridgeaudio.com

For all servicing, in or out of warranty, please contact your dealer.

Technical Specications

Power output 35 watts (into 8)

THD (unweighted) <0.01% @ 1kHz, 80% of rated power

<0.15% 20Hz - 20kHz, 80% of rated power

Frequency response (-3dB) 5Hz - 50kHz

S/N ratio (ref 1W) >82dB (unweighted)

Input impedances 47k ohms

Power Amp damping factor >50

Max. power consumption 260W

Bass/Treble controls Shelving, ultimate boost/cut

+/- 10dB @ 100Hz and 10kHz

Standby power consumption <0.5W

Inputs: 4x RCA, 1x Phono,

1 x 3.5mm Aux input (front panel)

Outputs: Speakers, Rec Out, USB 5V power

Dimensions (HxWxD): 83 x 430 x 335mm (3.3 x 16.9 x 13.2”)

Weight 5.6kg (12.3lbs)

Operating Instructions

After making any connections to your unit, activate the AXA35 by pressing the

Power button on the front of the unit.

SETTING THE SOURCE

Press the Source button on the front of the unit corresponding to your desired

source. Alternatively, you may use the appropriate button on the remote control

A2 A3A1 / AUX PHONOA4

AUX

HONO

ADJUSTING THE VOLUME

Use either the Volume Up/Down buttons on the remote control, or the Volume

control on the front of your unit system to change the volume level. The newly

selected level will be indicated briey on the front display.

The volume is displayed in minus dB where 0dB is the highest level.

A progressively larger negative number indicates the volume is being reduced.

ADJUSTING THE AUDIO SETTINGS

Adjustments to the bass, treble and balance can be made as follows:

1. To enter the audio menu. Press either the Menu button on the front of the unit or

on the remote control.

2. Step through the available settings by pressing the Menu button. The settings

available are in order Bass, Treble and Balance.

3. When you wish to make an adjustment for bass, treble or balance, simply rotate the

Volume control or use the Volume control buttons on the remote control.

4. To exit, wait for ve seconds, until the unit returns to normal mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio AXA35 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio AXA35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info