Bedienungsanleitung Cambridge Audio Azur 340R (Seite 20 von 22) (Englisch)

763777

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Bass Augment can be a useful function with PLII material because this

encoding type does not include an LFE Channel. This would normally

mean that if all the speakers in your setup were set to ‘Large’, the

subwoofer would in fact be inactive (as no bass has been re-directed

plus there is no LFE channel). If it is desired to have the subwoofer

running with all Large Speakers and PLII encoding, enable Bass

Augment for PLII and then set the Crossover point and level by ear. A Sub

channel will now be created from the Front Left and Right channels

without filtering them. As with all adjustments it is a good idea to

experiment to determine what works best with your particular setup.

Note: In Advanced Sub On mode, the Subwoofer level control in the ‘Level

Calibration’ menu will be inactive. This is because this setting is

overwritten by the three appropriate Sub Trim settings from the ‘Advanced

Sub’ menu.

OSD setup

On-Screen Display is available on the Composite and S-Video outputs

only. (Not available on Component Video or HDMI.) Select the ‘OSD

Setup’ menu, select ‘OSD Video’ and use the Left and Right arrows to

select whether you would like the OSD video source to be Composite or

S-Video:

The OSD can be shown either on a blue background or overlaid on the

analog video. Select Background’ and use the Left and Right arrows to

select between ‘Blue’ and ‘Video’ backgrounds.

The OSD can also be shown in several different languages. To change

the OSD language highlight the ‘Language’ menu and use the Left and

Right arrows to select between English, Dutch, French, German,

Spanish, Italian, Norwegian, Swedish and Danish.

Press the OSD button again to exit and save the options.

OSD Setup Menu

TV Format : PAL

Background : Blue

OSD Video : Composite

Language : English

Return To Menu : [OSD]

Advanced bass management continued

The 340R features an IR Emitter input that allows

modulated IR remote control commands to be received

electrically by the unit. These control commands are

typically generated by custom installation (multi-room)

systems or remote IR receiver systems. An RS232 port is

also featured which allows the 340R to be controlled by C.I.

systems.

In addition the 340R features ‘direct’ IR/Control codes as well as toggle

codes for many of their features to simplify programming custom

installation systems. Special direct On/Off commands can be accessed

on the supplied remote control for teaching into C.I. systems as follows:

1. Press and hold the Standby/On button on the remote control. The

remote first generates it's standby (toggle) command. Keep the

button held down, after 12 seconds an AV receiver ‘On’ command will

be generated. If the button is kept held down for a further 12

seconds, an AV receiver ‘Off’ command is generated.

Repeat this procedure with the Mute, Sub On/Off, Stereo Mono and

Tuner FM/AM buttons to send On/Off commands. The Tuner FM/AM

button also provides unique FM and AM commands to allow switching to

a specific band.

A full IR code table and RS232 protocol for this product is available on

the Cambridge Audio website at: www.cambridge-audio.com

Custom installation (C.I.) use

IR Emitter

RS232C

Reset/Back-up memory

The 340R has a function that preserves the preset memory and other

settings. In the event of a power failure, or if the power cord of the unit

is disconnected from the mains outlet, the back-up memory will

preserve the preset memory for approximately one week. If the power

supply is interrupted for 7 days or longer, the memory settings will be

erased.

If it is desired to reset all settings to their factory defaults (or in the

unlikely event that the unit locks up due to an electrical discharge etc),

with the unit on and out of Standby mode press and hold the DVD and

5.1 Direct buttons on the front panel for three seconds:

‘RESET’ will appear briefly on the front panel display before returning to

Standby mode.

Mode/Store

DVD Video 1

Dolby Digital/

DTS

DSP

Mode

Pro Logic II Input

Mode

Stereo

Mode

Video 2 Video 3 Tuner FM/AM Tape/MD/CDR CD/Aux 5.1 Direct

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 340R Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 340R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info