Bedienungsanleitung Cambridge Audio Azur 351C (Seite 8 von 11) (Englisch)

497539

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Operating instructions

Loading and unloading discs

1. Press the button.

2. When the disc tray has opened fully, place a disc carefully in the tray with

the label side facing up.

3. To close the disc tray, press the button again. When the tray, with

a correctly loaded disc, is fully closed the CD player will read the disc

and display the content information.

4. The disc tray can be opened at any time by pressing the

button.

Only remove the disc after the tray has fully opened.

Note:

– Do not put anything except a compact disc into the tray. Foreign

objects may damage the mechanism.

– Do not force the tray by hand during the opening and closing

operations.

– To avoid dirt and dust entering the mechanism, keep the disc tray

closed.

– If the compact disc is badly scratched or too dirty, the player may not

be able to read it or play it.

– Never load more than one disc into the disc tray at any time.

Normal disc play

This unit has been designed to play compact discs,

recordable CDs (CD-R) and re-writable CDs (CD-RW) bearing

the identication logo shown here. No other discs can be

used. Any CD-R/CD-RW discs should contain properly recorded TOC

(Table of Contents) information so that they can be played back. This unit

can play only the discs recorded in the CD-DA format designed for music

reproduction. Do not attempt to play a disc containing other data, such

as a CD-ROM for PCs with mp3 or WMA les, on this unit.

1. Switch on your amplier and set its input selector to the correct

position. Adjust the volume control to a minimum.

2. Press the Open/Close (

) button to open the disc tray and load a

disc.

3. Press the

button again to close the tray. The CD player will read the

disc.

4. To begin playback, press the Play (

) button.

5. When the last track has nished playing, the display will return to

Table of Contents (TOC).

6. To stop the disc at any point, press the Stop () button. Pressing the

Pause (

) button while the disc is playing will pause the disc and

illuminate the pause icon on the display. Playback can be resumed

by pressing the Play (

) button again.

Locating a specic track during playback

1. A single short press of the Skip/Scan (  ) button will take you to the

beginning of the next track on the CD. Repeat as necessary.

2. A single short press of the Skip/Scan ( ) button will take you to the

beginning of the previous track.

Locating a specic track when playback is stopped

1. A single short press of the Skip/Scan () button will skip between

tracks.

2. Press and hold to scroll rapidly through tracks.

3. Press the Play (

) button to start playback from the selected track.

Repeating discs and tracks

1. Ensure that the disc is loaded.

2. Press the Repeat button on the remote control. ‘Repeat All’ will

appear on the display. Press Play (

). The whole disc will now be

repeated until the function is turned off.

3. To repeat a specic track, press Repeat twice while the track is

playing. ‘Repeat Track’ will appear on the display. Press Play and the

selected track will now repeat until the function is turned off.

Alternatively, press Repeat twice, select the chosen track using the

numerical buttons on the remote control and press Play.

4. Press Repeat again either before or during playback to turn off the

repeat function.

Note:

– ‘Repeat Track’ is not available in Program mode.

– Selecting ‘Repeat Track’ when ‘Random’ mode has been selected

will automatically cancel ‘Random’ mode.

Playing tracks in random order

1. Ensure that a disc is loaded.

2. Press the Random button on the remote control. ‘Random’ will

appear on the display.

3. Press Play (

). The CD player will now play the entire disc in random

order.

It is also possible to press the Random button during playback to

listen to tracks in random order.

4. Press Random to exit the Random function. The disc will continue

playing to the end in the correct order.

5. Press the Stop (

) button at any time to stop the disc.

Note: Selecting ‘Random’ mode when ‘Repeat Track’ has been selected

will automatically cancel ‘Repeat Track’ mode.

Using the Remain function

1. Ensure that the disc is playing.

2. Press the Remain button on the remote control once to display the

time remaining for the track playing.

3. Press Remain a second time to show the total remaining disc time.

4. Press Remain again either before or during playback to return to

normal play mode.

1 2

4 5 6

Auto Play Auto Power Down

OffOn

Off 30min60min 120min

1 2

4 5 6

Auto Play Auto Power Down

OffOn

Off 30min60min 120min

1 2

4 5 6

Auto Play Auto Power Down

OffOn

Off 30min60min 120min

1 2

4 5 6

Auto Play Auto Power Down

OffOn

Off 30min60min 120min

1 2

4 5 6

Auto Play Auto Power Down

OffOn

Off 30min60min 120min

1 2

4 5 6

Auto Play Auto Power Down

OffOn

Off 30min60min 120min

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 351C Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 351C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info