Bedienungsanleitung Cambridge Audio Azur 540 R (Seite 9 von 12) (Englisch)

497437

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

10 azur 540R AV receiver

OPERATION

Playing s

ource m

aterial

1. Switch the Power button on the rear panel to ON.

2. Press Standby button to switch on the 540R.

3. Select desired source by pushing the corresponding button on the

540R’s front panel or by using the remote handset.

Note - The Input Mode button is used to select the input mode of

the source equipment, either analogue (ANA), optical (OPT), or

coaxial (COAX) depending on rear panel connection made.

If you are connecting your source equipment digitally (via Optical or

Coaxial connections) then the symbols should appear on the

display. If UNLOCK appears on the display, the source is either not

connected properly or the source is not switched on.

4. Play the source, and gradually turn up the volume to the required

level with the Master Volume control.

Tuner o

perations

Automatic t

uning

1. Press the Power button, then press the Standby button to On.

2. Press the Tuner FM/AM button on the front panel or remote

handset.

3. Use the FM/AM button to select FM or AM.

4. Press the Mode/Store button on the front panel or the Mode button

on the remote handset to select automatic or manual tuning mode.

5. Press Tune + and Tune - to select the station you want to listen to

or when a station is tuned in, the tuning process will stop

automatically. (Automatic selection).

6. Press Tuning + or Tuning - again to select another channel.

Manual t

uning

This is for selecting stations, which cannot be tuned automatically

(manual selection).

To tune a channel manually, proceed as above, at Step 4 select Manual

and use the Tuning +/- buttons to move up or down the frequencies.

Two FM modes available, stereo and mono - Press the Stereo/Mono

button on the remote control to alternate between Stereo mode and

Mono mode.

If the Display button is pressed, the details of incoming source will be

displayed.

Storing s

tations

1. Press the tuner FM/AM button.

2. Select AM or FM by again pressing the Tuner FM/AM button.

3. Press the Mode/Store button two times to select manual tuning

mode, then press the Tuning +/- button to select a frequency

channel you want to preset.

4. Pressing and holding the Mode/Store button for 5 seconds will

bring up the "MEM" icon.

5. Use the Tuning+/- buttons to select a preset station. The station

number will be displayed on the screen.

6. Press the Mode/Store button to memorise.

How t

o s

elect p

reset s

tations

Press the Mode/Store button on the front panel three times until

PRESET appears on the front panel display, then by pressing the Tuning

+/- buttons you can select a preset channel.

Radio D

ata S

ystems (

(

RDS)

RDS is a method for the transmission of additional information from

local radio stations. It is only available in FM mode.

RDS will only work if the local broadcasting stations have RDS

transmission and the signal is strong enough.

1. Press the Display button on the remote, there are functions for PS,

PTY, CT and RT.

2. For PS (Station Name), press the Display button on the remote until

"PS" appears. The current station name will be shown.

3. For PTY (Program Type), press the Display button on the remote

until "PTY" appears. The current name type of the program will be

shown.

4. For CT (Clock - Time), press Display on the front panel until "WAIT"

appears. The current time from Radio Station will be displayed.

Note that the Clock - Time will be only transmitted from local radio

station once a minute.

5. For RT (Radiotext), press the Display button on the remote until "RT"

appears. Some Text messages will be shown.

PTY s

earch (

(

program t

ype s

earch)

1. Press the PTY button on remote control, "PTY SELECT" will flash on

the display.

2. Press Tuning + /- to choose the program type, for example NEWS or

SPORT.

3. Press PTY again once you have chosen the program type.

When the selected type of program is tuned in, it will stop searching,

otherwise, "NO FOUND" will appear.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 540 R Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 540 R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info