Bedienungsanleitung Cambridge Audio Azur 551R V2 (Seite 22 von 28) (Englisch)

656752

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Audio Return Channel

The 551R V2 supports an Audio Return Channel (ARC) function from TVs that

also support this function (which must feature an HDMI 1.4 input and have

actually implemented the ARC feature, see your TVs manual).

ARC allows a TV to send audio back down its incoming HDMI lead to the

551R V2's HDMI 1 output socket. This function allows the 551R V2 to play

back the audio from a TVs built-in terrestrial cable or satellite tuner whilst

you watch it's picture.

To enable the use of ARC navigate to the select TV– ARC and use the ◄ ►

buttons on the remote to select the Enabled setting.

azur 551R

Video In. Select

Audio In. Select

Tone/Sub Config.

Speaker Config.

Speaker Distance

Speaker Level

Speaker Xover

Auto Setup

Advanced Setup

OSD Setup

BD/DVD

CD/Video1

Video2

Video3

Tape/MD/CDR

Aux/TV

7.1 Direct

Preamp Out

HDMI 1 out TV ARC

HDMI 1 out to TV

Back : [I/O]

HDMI < >

Digital < >

HDMI < >

Analog

Normal < >

Enabled < >

Disable < >

Using ARC

ARC can be started in one of two ways. If your TV supports it there may be a

menu item to start ARC on your TV.

Your TV then sends commands to the 551R V2 which cause it to start an ARC

session and 'TV-ARC' will appear on the front panel display automatically.

Some TVs may also start an ARC session whenever you select the in-built

tuner and stop when you select another source.

Alternatively you can start ARC by pressing the Aux/TV button twice on the

551R V2 (as long as TV-ARC has been enabled in the 551R V2s OSD as

above).

The rst press selects Aux or the Aux button, the second selects ARC and

'TV-ARC' appears on the front panel display. The 551R V2 will then send

commands to the TV over HDMI to try to start an ARC session.

To nish ARC simply disengage it on your TV or press a different source

button on the 551R V2.

Audio split mode

In some circumstances the 551R V2 is able to allow the user to view one

source whilst listening to another. For instance you could watch the video

of a sports channel whilst getting an audio commentary from another such

as the Tuner.

To perform Audio Split:

1. Select the source you wish to watch in the normal way.

2. Press and hold the button for the source you wish to listen to. After 4

seconds approx. "Audio Split" will scroll across the display and you will now

be listening to that source instead. Video will not have changed.

1 2

The 551R V2 allows splitting from any source whatever its video input type

but only to sources where analogue or digital audio is the current audio input

type, not HDMI.

Operating instructions cont.

If the combination is not allowed "Mode Unavailable" will instead scroll

across the display and no change will be made.

To cancel audio split mode simply select a new source and normal operation

will be resumed.

Advanced setup

For most users the basic four stage setup process (Page 22 onwards) should

be sufcient for normal use.

However the 551R V2 also features many more advanced settings for

users who wish to further customise the settings and operation to personal

preference.

Sub crossovers and bass management

As covered in the '551R V2 Setup' section the 551R V2 performs bass

management for any speaker that is set to 'Small' in the OSD. This means

that bass for speakers that are unable to reproduce bass effectively is

instead routed to the subwoofer.

azur 551R

Video In. Select

Audio In. Select

Tone/Sub Config.

Speaker Config.

Speaker Distance

Speaker Level

Speaker Xover

Auto Setup

Advanced Setup

OSD Setup

Front L/R

Center

Surr. L/R

Surr. LB/RB

Back: [I/O]

80Hz < >

The crossover adjustments in the Speaker crossover menu are used to

determine the point as which this transition is made. In other words they set

the frequency below which bass is routed away from any 'Small' speakers

and into the Subwoofer channel. It should be understood that bass sent to

the subwoofer by bass management is different to bass encoded into the

surround-sound material as a dedicated Low Frequency Effects channel.

If the source material contains a separate LFE channel (i.e. DD or DTS

material) this is always routed to the subwoofer (if it is On) and is not affected

by the crossover setting. Some encoding types (Such as Dolby Pro Logic II/IIx

and Neo:6) do not actually have a LFE channel.

The default setting for all bass management crossovers is 80Hz and is a

good global starting point. If you do not wish to make any adjustments simply

leave all crossovers at this default setting.

Note: These settings are actually only used for speakers that have been set

to Small in the Speaker Cong. menu.

For advanced users it is however possible to adjust the speaker crossovers

used for any speakers set as 'Small' independently to allow for the fact that

you may wish to direct bass away from front oorstanding speakers (and to

the Subwoofer) at perhaps 50Hz but away from Surround Left and Rights at

perhaps 100Hz. If you wish to make these adjustments it is best to consult

your loudspeaker manufacturers documentation or contact your dealer to

determine the frequency response of your system and where each speaker

types bass response starts to tail off (often called the 3dB or 6dB roll off/

cutoff point). This would be approximately the point the corresponding

crossover should be set to.

Cambridge Audio Azur 551R V2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 551R V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info