650Tazur
7
ENGLISH
Remote control
The 650T is supplied with a system remote
control that operates both this tuner and
Cambridge Azur amplifiers.
Power
Switches the unit between Standby mode
(indicated by dim power LED) and On (indicated
by bright power LED). Standby is an eco power
mode where the power consumption is less than
one watt.
Note: Press the Info button to briefly display the
current time and date.
0–9 numeric keys
These allow access or store presets. Also used to
enter PIN in SIRIUS mode.
-/--
Allows access to preset stations. Press the -/--
button then use the numeric keys. Press the
Select/Mode button to confirm.
Store
To store a preset with the remote press the Store
button then use the numeric keys to select the
desired preset location. Press the Select/Mode
button to confirm.
NCT (Natural Contour Technology)
Press to toggle between the sound settings of
“Warm”, “Dynamic” or “Off”. Experiment to
achieve the optimum sound quality from your
650T for each station. Please note that the NCT
mode will also be stored preset by preset so that
you may use different settings for each station.
Band
This button switches between the AM, FM, DAB
or SIRIUS bands as appropriate.
Skip/Scan
DAB/SIRIUS mode - Press to browse/tune
through available stations.
AM/FM mode - Press to move the frequency in .05MHz steps up or down.
Press and hold to scan up or down to the next strong station.
Note: Also used for Clock/Alarm/Sleep/Menu settings and manual tuning
in DAB mode.
Select/Mode
FM mode - Press and hold to toggle Radio mode ‘Ster/Mono’.
DAB mode - Press and hold to toggle Auto Select ‘On/Off’.
SIRIUS mode - Press and hold to enter menu, Channel Lock, Channel
Browse, Category Browse.
Clock
This button is used to access the Clock and Alarm menu. See Operation
Instructions section of this manual.
(Info)
Press to select and view different information on the front panel display.
The display modes are:
SIRIUS mode - Press once for Name, Catergory, Title, Artists, Signal
Strength, NCT mode, Date/Time, Sleep and Alarm.
Press and hold to display the SIRIUS ID. Press again to exit SIRIUS ID.
DAB mode - Radio Text, Program Type, Transmission Group, Signal
Strength, Date/Time, NCT mode, Frequency Info, Bitrate, Alarm and Sleep.
Press and hold to initiate manual tuning in DAB mode. Press and hold to
exit manual tuning mode. See later section for more information.
FM mode - Program Type, Radio Text, Frequency, Signal Strength, Stereo
mode, NCT mode, Date/Time, Alarm and Sleep.
AM mode - Time/Date, Alarm, Sleep and NCT mode.
Standby mode - Press to turn the display backlight on for a few seconds.
Bright
Alters the brightness of the display backlight. There are three levels of
brightness: Bright, Normal, and Off.
Please note that the following buttons will only operate on a matching
Cambridge Audio Azur amplifier:
Volume
Volume buttons to increase or decrease the Volume of the amplifier
output.
Mute
This button mutes the audio on the amplifier. The Mute mode is indicated
by the channel LED flashing.
Source select
The five source select buttons and the Tape Monitor select button are
used to change the input source (MP3, CD, DVD etc).
