Bedienungsanleitung Cambridge Audio Azur 751R V2 (Seite 8 von 40) (Englisch)

656755

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Volume

Increase or decrease the volume of the AV receiver output.

Also used as up/down in the OSD setup menus.

Enter

Used in the OSD setup menus.

◄ ► Tune / Left & Right

Press the right arrow to increase tuner frequency/change

preset. Press the left arrow to decrease tuner frequency/

change preset. Also used to scroll left/right in the OSD

setup menus.

Mute

Mutes the audio on the AV Receiver. Press again to cancel

mute.

Picture adjustment

Press to select various picture adjustments for sources

that have the Scaler set to Process only.

An adjustment bar will appear on the TV for the current

item (Brightness, Contracts etc.) Press the Pic. Adj. button

again to move to the next item. Use the volume buttons to

make the adjustments.

Pressing and holding Pic. Adj. when the OSD is active

switches the active HDMI output. See later 'HDMI A and

B outputs' section.

Lip sync

Press to activate and adjust the lip sync delay function if

the audio and video appear out of sync. While the Lip sync

delay status is shown on the units display, use the Vol

and Vol

buttons to adjust the delay time. Adjusting the

value to zero causes lip sync delay to be turned off. See

later section in this manual.

Info

Press to view the current source material and decoding

mode. Press again whilst the current decoding mode

is scrolling (as long as mute is not on) to display the

incoming sample rate. When listening to FM with RDS,

press to cycle round various RDS information modes.

Dim

Adjust the backlight of the front panel display; off, dim,

bright or very bright.

Tuner AM/FM, BD/DVD, Video 1, Video 2,

Rec 1, Aux/TV, CD, Rec 2, Vid 3/MP3, USB,

Exp.

Press the corresponding button to change the input

source. Pressing the Tuner AM/FM button a second time

toggles between AM and FM modes.

Pressing the Aux/TV button a second time if ARC is enable

(see later section) selects TV-ARC (Audio Return Channel).

Note: Expansion (Exp) button is only used with older AV

receiver.

The above button descriptions are naturally brief. Please

refer to the 'Operating Instructions' section of this

manual for more information on the relevant functions

implemented.

7.1 direct

Selects the 5.1/7.1 direct input.

& Trigger A/B

Toggle On and Off the Trigger outputs. See trigger section

for details and setup.

Main remote control

The 751R V2 is supplied with an Azur Navigator remote

control. Insert the supplied AAA batteries to use. For full

details of the various adjustment functions available from

the remote, refer to the later sections of this manual.

This remote can be used in the Main Zone or Zone 2 (via

an IR repeater system) and will automatically affect only

the Zone in which it is used.

Backlight button

Press to turn the backlight on and illuminate the remote

control buttons. Press and hold for a few seconds (all

buttons will initiate a rapid ashing) to enable backlight

function by pressing any buttons on the remote. Press and

hold again to disable function and revert to default.

Standby/On

Switches the unit between Standby mode and On.

HDMI preview

Press to see the previews of different HDMI sources

connected to the unit. Use Vol

and Vol buttons to

navigate. See later section of the manual.

Analogue direct

Directly selects a stereo analogue input for the current

source with no A/D or D/A conversion or DSP processing.

Stereo modes

Selects Stereo or Stereo + Sub modes for Analogue or

Digital sources (digitally processed).

Surround modes

Selects digital surround processing modes and various

matrix encoded surround processing modes for analogue

or digital sources (digitally processed).

Stereo/Mono

When listening to FM, press to alternate between stereo

and mono modes.

Store

Press to store the current frequency as a preset when in

Tuner mode.

Mode

Press to select Auto/Manual or Preset tuning when in

Tuner mode.

Audio in type

Switches the audio between the types available for the

current source. Depending on the source selected and

whether you have assigned an HDMI input to it, Analogue,

Digital and HDMI can be available.

Bass/Treble

Press for bass/treble adjustment, using the Volume up/

down buttons. Note: Bass/Treble is bypassed in analogue

stereo direct and 7.1 direct modes.

Zone 2

Selects Zone 2 and displays its status on the display.

The next source change, Standby/On or volume control

commands will affect Zone 2 instead of the Main Zone.

See Zone 2 section for details.

On-screen display (OSD)

Press to turn on and off the on-screen setup menus for

display on your monitor/screen.

Source button

Press to cycle through different sources.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 751R V2 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 751R V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info