Bedienungsanleitung Cambridge Audio Azur 751R V2 (Seite 24 von 40) (Englisch)

656755

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Dolby Pro Logic and Neo:6 are both available in various guises to decode

appropriately encoded soundtracks. Additionally DSP modes are available to

process sources with no encoding at all. Due to the matrix encoding process

none of these modes incorporate ags that tell the 751R V2 the type of

encoding used in the source material. Thus you must manually select these

modes.

Pressing the Surround Modes button when the 751R V2 has locked to a

DD/DTS bitstream will present more options where possible including Post-

Processed modes.

These are modes that allow extra processing to be applied after the main

surround-sound decoding. For instance Dolby Digital (2/0) + Dolby Pro Logic

II Music. Which adds a 5.1 Dolby Pro Logic decode to a Stereo Dolby Digital

decode to turn 2 channel stereo into 5.1.

For 7.1 Speaker setups, the number of decoding possibilities increases as

shown in the following 'Decode modes' tables. Several extra Post Processing

modes are available using either Dolby Pro Logic IIx or Neo:6.

Incoming Dolby Digital/DTS streams are always shown on the front panel

display as Dolby Digital (x/x).x or DTS (x/x).x, where the bracketed numbers

indicate the active channels in the source material. Active output channels

are shown by the icons on the right hand side of the front panel display.

Possible incoming DD/DTS types are:

(1/0) – Mono, Centre channel only

(2/0) – Left/Right stereo

(2/0).1 – Left/Right stereo and LFE (Sub)

(2/2) – Left/Right stereo and Left/Right surround

(3/0) – Left, Centre, Right

(3/0).1 – Left, Centre, Right and LFE (Sub)

(3/2).1 – 5.1: Left, Right, Centre, Left Surround, Right Surround and LFE

(Sub)

(3/4).1 – 7.1: Left, Right, Centre, Left Surround, Right Surround,

Surround Back Left, Surround Back Right and LFE (Sub)

Operating instructions

To activate the 751R V2, switch the Power switch on the rear panel to On

then press the Standby/On button on the front panel.

Selecting the source

1. Select the desired source by pushing the corresponding source button on

the front panel or remote control.

2. If necessary, press the Audio Input Type button to select the input mode

of the source equipment, either analogue, digital or HDMI (depending on

the connection made on the rear panel). You may have already assigned

this in the 'Audio In/Out Setup Menu' in the OSD.

The digital, analogue or HDMI icons on the display show which is the

currently selected input type.

Note: The 751R V2 stores the input type for each source so that it is

automatically recalled when that source is selected again.

Selecting the desired listening mode

Select an appropriate mode for the source material/type you are listening to

by pressing the Stereo or Surround Modes button and cycling through sub-

modes where available.

In all cases the rst time a mode button is pressed the 751R V2 will report

the current decoding mode on the front panel display. Pressing the button

again will then cycle to the next available mode (if there is one). If no button

is pressed for 4 or 5 seconds the 751R V2 returns to normal operation

without changing mode.

Stereo Modes – Selects 2 channel Stereo operation for stereo material,

pressing again selects Stereo + Sub mode.

This is a digitally processed mode that allows bass and treble controls, and

sub generation if required. The input can be either analogue (in which case it

will be turned into digital by 24 bit A/D conversion) or natively digital.

Surround Modes – Selects a range of digital surround modes for the

appropriately digitally encoded material

Note: Some Surround Sound types (such as the Dolby and DTS HD) are

available only from Blu-ray disc over HDMI.

Pressing the Surround Modes button will cause the 751R V2 to lock onto

the incoming bitstream and select the rst available mode for the current

bitstream type.

In some circumstances (see tables) pressing the button again will switch to

an alternative decoding option.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 751R V2 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 751R V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info