Bedienungsanleitung Cambridge Audio Azur 751R V2 (Seite 29 von 40) (Englisch)

656755

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

751R V2azur

ENGLISH

The 751R V2 supports an Audio Return Channel (ARC) function from TVs that

also support this function (which must feature an HDMI1.4 input and have

actually implemented the ARC feature, see your TVs manual).

ARC allows a TV to send audio back down its incoming HDMI lead to the

751R V2's HDMI A output socket.

This function allows the 751R V2 to play back the audio from a TVs built-in

terrestrial cable or satellite tuner whilst you watch it's picture.

Using ARC

The ARC must rst be enabled in the Advanced Audio Setup menu.

Advanced Audio Setup

Multi Ch.Out :

HDMI Bypass :

TV ARC(HDMIA) :

Auto Power Down :

Pre Out

Normal

Enable

Return I/O

ARC can be started in one of two ways. If your TV supports it there may be a

menu item to start ARC on your TV.

Your TV then sends commands to the 751R V2 which cause it to start an ARC

session and 'TV-ARC' will appear on the front panel display automatically.

Some TVs may also start an ARC session whenever you select the in-built

tuner and stop when you select another source.

Alternatively you can start ARC by pressing the Aux/TV button twice on the

751R V2 (as long as TV-ARC has been enabled in the 751R V2's OSD which

is the default setting).

The rst press selects Aux, the second selects ARC and 'TV-ARC' appears on

the front panel display. The 751R V2 will then send commands to the TV over

HDMI to try to start an ARC session.

To nish ARC simply disengage it on your TV or press a different source

button on the 751R V2.

Picture adjustment

For sources that have had the Scaler set to Process the 751R V2 can provide

some picture adjustments.

These adjustments are remembered source by source.

Pressing a source for which the scaler is in Bypass will do nothing.

Pressing a source for which the scaler is set to Process will bring up the rst

adjustment item, shown at the bottom of the screen as below:

Contrast: +41

1. Press the Tuner FM/AM button on the front panel or remote control to

select Tuner mode.

2. Press the Tuner FM/AM button again to select FM or AM if desired.

3. Press the Mode/Store button on the front panel (or Mode button on the

remote control) to select automatic tuning, manual tuning or preset mode.

4. Press the Tuning + and Tuning - buttons (or the left and right arrow buttons

on the remote) to select the station you want to listen to.

In automatic tuning mode the unit scans to the next strong station. In manual

tuning mode the user can step manually through the frequencies. In preset

mode the unit cycles through the presets only.

Two FM modes are available, stereo and mono - Press the Stereo Mono

button on the remote to alternate between Stereo mode and Mono mode. If

the Display button is pressed, the RDS station names of FM stations will be

displayed if available.

Storing stations

1. Tune in a station you wish to store as explained previously.

2. Press and hold the Mode/Store button (or use the Store button on the

remote) for 5 seconds.

3. Use the Tuning +/- buttons to select a preset station number (1-15). The

station number will be displayed on the screen.

4. Press the Mode/Store button (or use the Store button on the remote) to

memorise the frequency.

Radio Data Systems (RDS)

RDS is a method for the transmission of additional information from local

radio stations. It is only available in FM mode. RDS will only work if the

local broadcasting stations have RDS transmission and the signal is strong

enough.

Press the Info button on the remote and go through the displayed functions.

There are functions for PS, PTY, CT and RT:

PS (Station Name) – current station name will be shown

PTY (Program Type) – current name type of the program will be shown

CT (Clock/Time) – current time from Radio Station will be displayed.

Note: Clock/Time will be only transmitted from local radio station once a

minute. If the Clock - Time is not available the message "NO CT" will appear

briey on the display.

RT (Radiotext) – Radiotext messages will be shown, if available.

Lip sync

The 751R V2 can if required apply a small delay to the audio playback to

resynchronise it to any video playback which appears to be behind the audio

in time.

This can sometimes happen if the video is slightly delayed by a player or TV

performing a lot of video processing.

Pressing the Lip Sync button on the remote will bring up the

current Lip Sync value on the 751R V2's main display and allow

adjustments in 10mS (10 thousandths of a second) increments.

Setting the Lip sync value to 0 causes Lip Sync delay to be turned off.

Note: The Lip sync value is stored and recalled separately for each source.

Using the tuner Audio Return Channel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 751R V2 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 751R V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info