Bedienungsanleitung Cambridge Audio Azur 752BD (Seite 4 von 40) (Englisch)

497532

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

The lightning ash with the arrowhead symbol within an equilateral

triangle is intended to alert the user to the presence of un-insulated

‘dangerous voltage’ within the product’s enclosure that may be of

sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

instructions in the service literature relevant to this appliance.

The symbol on this product indicates that it is of CLASS II

(double insulated) construction.

WEEE symbol

The crossed-out wheeled bin is the European Union symbol

for indicating separate collection for electrical and electronic

equipment. This product contains electrical and electronic

equipment which should be reused, recycled or recovered

and should not be disposed of with unsorted regular waste.

Please return the unit or contact the authorised dealer from whom you

purchased this product for more information.

CE mark

This product complies with European Low Voltage (2006/95/

EC), Electromagnetic Compatibility (2004/108/EC) and

Environmentally-friendly design of Energy-related Products (2009/125/

EC) Directives when used and installed according to this instruction

manual. For continued compliance only Cambridge Audio accessories

should be used with this product and servicing must be referred to

qualied service personnel.

C-Tick mark

This product meets the Australian Communications Authority’s

Radio communications and EMC requirements.

Gost-R Mark

This product meets Russian electronic safety approvals.

Ventilation

IMPORTANT – The unit will become hot when in use. Do not stack multiple

units on top of each other. Do not place in an enclosed area such as a

bookcase or in a cabinet without sufcient ventilation.

Ensure that small objects do not fall through any ventilation grille. If this

happens, switch off immediately, disconnect from the mains supply and

contact your dealer for advice.

Positioning

Choose the installation location carefully. Avoid placing it in direct

sunlight or close to a source of heat. No naked ame sources, such

as lighted candles, should be placed on the unit. Also avoid locations

subject to vibration and excessive dust, cold or moisture. The unit can

be used in a moderate climate.

This unit must be installed on a sturdy, level surface. Do not place in a

sealed area such as a bookcase or in a cabinet. Do not place the unit on

an unstable surface or shelf. The unit may fall, causing serious injury to

a child or adult as well as serious damage to the product. Do not place

other equipment on top of the unit.

Due to stray magnetic elds, turntables or CRT TVs should not be located

nearby due to possible interference.

Electronic audio components have a running in period of around a week

(if used several hours per day). This will allow the new components to

settle down and the sonic properties will improve over this time.

Power sources

The unit should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power-supply to

your home, consult your product dealer or local power company.

This unit can be left in Standby mode when not in use and will draw

<0.5W in this state. To turn the unit off, unplug it from the mains socket.

Overloading

Do not overload wall outlets or extension cords as this can result in a risk

of re or electric shock. Overloaded AC outlets, extension cords, frayed

power cords, damaged or cracked wire insulation and broken plugs are

dangerous. They may result in a shock or re hazard.

Be sure to insert each power cord securely. To prevent hum and noise, do

not bundle the interconnect leads with the power cord or speaker leads.

Cleaning

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any

cleaning uids containing alcohol, ammonia or abrasives. Do not spray

an aerosol at or near the unit.

Battery disposal

Please dispose of any discharged batteries according to local

environmental/electronic waste disposal guidelines.

Connections

Before making any connections, make sure all power is turned off and

only use suitable interconnects.

Servicing

These units are not user serviceable. Never attempt to repair,

disassemble or reconstruct the unit if there seems to be a problem.

A serious electric shock could result if this precautionary measure is

ignored. In the event of a problem or failure, please contact your dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 752BD Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 752BD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info