Bedienungsanleitung Cambridge Audio Azur 752BD (Seite 31 von 40) (Englisch)

497532

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

752BDazur

ENGLISH

Speaker Conguration (7.1 channel

analogue audio output only)

The following settings determine how the 752BD’s internal surround-

sound decoder operates. They do not affect audio transmitted over

HDMI or S/P DIF/TOSLINK.

In the Speaker Conguration menu you can congure speaker settings

such as down-mix mode, number of speakers, their distance, size and

trim level. The Speaker Conguration menu shows an illustration of the

speaker placements to assist you on properly conguring the speaker

parameters.

Upon entering this menu, the cursor is positioned on the front left

speaker. You may use the / buttons to move the cursor. The 

button moves the cursor in clockwise sequence, and the  button

moves the cursor in counterclockwise sequence.

When the cursor is over the

"Down Mix" or "Exit" options, you can also use

the / buttons to highlight these options.

Down Mix Mode

Down mix is the process of converting multi-channel audio to a lesser

number of channels. For example, converting a 5.1ch source to stereo or

converting a 7.1ch source to 5.1ch. Down mixing allows the audio output

from the player to match the exact number of speakers available in your

home theatre system.

The current down mix mode is displayed in the lower right corner of the

speaker placement illustration.

To change the audio down mix setting, press the Enter button while the

cursor is over the

"Down Mix" option. The following down mix modes are

available:

LT/RT – Left Total/Right Total. The centre and surround channels are

decoded and then Matrix encoded into the two front channels. A Dolby

Pro Logic receiver can then decode the two channel audio that is output

back into surround audio.

Stereo - This mode down-mixes multi-channel audio to 2-channel stereo

output. For original stereo content the output will not change. For original

multi-channel content the surround and centre channels will be mixed

with the left and right front channels. Recommended for use with TV sets

or stereo receiver/ampliers (without Pro Logic decoding).

5.1Ch – This mode enables 5.1ch decoded audio output. The number

of actual output channels depends on the disc. If the source content

has more channels, the surround back channels will be mixed into the

surround channels.

7.1Ch – This mode enables 7.1ch decoded audio output. The number of

actual output channels depends on the disc.

Test Tone

Test tone is a special group of articially-created sounds that are used

to test your audio speaker system and help to identify any wiring faults.

By default the Test Tone is set to

"Off", with the status is displayed in the

lower left corner of the screen.

To begin the test, press the / buttons to highlight the

"Test Tone"

option, press the Enter button to change the test tone status to "On".

Then press ARROW buttons to select a speaker, you will hear the test

sounds. To stop the test process, press / buttons to highlight the

"Test Tone" option and press the Enter button to switch the status back

"Off". Please note these test tones only apply on multi-channel audio

outputs.

Speaker Settings

For each speaker in the home theatre system, you can set its size,

distance and trim level. To congure a speaker, move the cursor to

highlight the speaker and press the Enter button. The Speaker Settings

menu on the right side of the screen will be activated. In the Speaker

Settings menu, use the / buttons to select a parameter, and then

press the Enter button to change it. To exit the Speaker Settings menu

and return to the Speaker Conguration illustration, press the  button

or select the

"Exit" option. You can also move on to congure the next

speaker by selecting the

"Next Speaker" option.

The following speaker parameters can be congured:

1. Size

The speaker size parameter sets bass ltering control for the speakers.

The bass frequency is set in the

"Crossover Frequency" option of the

"Audio Processing" section of the Setup menu:

Large – Bass frequencies are passed to the speakers.

Small – Bass frequencies are not passed to the speakers to reduce

possible distortion. If a subwoofer is available, bass frequencies are

redirected to a subwoofer.

On (for subwoofer only) – Specify that a subwoofer is available.

Off – Speaker for the corresponding position does not exist. Audio for

the missing speaker is redirected to other speakers or discarded if

redirection is not possible.

Note: The front, surround and surround back speakers are congured as

pairs. Changes to the size of one speaker will automatically change the

other speaker of the pair.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 752BD Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 752BD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info