Bedienungsanleitung Cambridge Audio Azur 851C (Seite 14 von 16) (Englisch)

497439

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

The 851C incorporates a Control Bus input and output that enables un-

modulated handset commands (positive logic, TTL level) to be received

electrically by the unit and looped to another unit if desired. These

control commands are typically generated by custom installation (multi-

room) systems or remote IR receiver systems. The Control Bus sockets

are colour-coded orange.

An IR Emitter Input is also provided that enables modulated IR handset

commands to be received electrically by the unit. Commands on this

input operate the unit only and are not looped out demodulated on the

Control Bus Output. This feature is useful for multi-room systems (such as

the Cambridge Audio Incognito multi-room system) which feature routed

I.R. emitter outputs. Instead of using window emitters stuck over the

CD players front panel IR receiver, a mono 3.5mm mini- jack to 3.5mm

mini-jack lead can be used for a more reliable electrical connection. An

RS232 port is also featured which allows the 851C to be controlled by

C.I. systems.

In addition the units feature “direct” IR Control codes as well as toggle

codes for some of their features to simplify programming custom

installation systems. Special direct On/Off and Mute commands can

be accessed on the supplied handset for teaching into C.I. systems as

follows:

1. Press and hold the Standby/On button. The remote rst generates

it’s standby (toggle) command. Keep the button held down, after 12

seconds a CD player “On” command will be generated. If the button is

kept held down for a further 12 seconds, a CD player “Off” command

is generated.

A full code table and RS232 protocol for this product is available on the

Cambridge Audio website at: www.cambridge-audio.com.

Custom installation (C.I.) use

The 851C is a complex product but even so, should things seem not

quite right, the answer is very often a simple one.

Player will not switch on

Ensure the AC power cord is connected securely.

Ensure the plug is fully inserted into the wall socket and that the socket

is switched on.

Check the fuse in the mains plug or adaptor.

The player will not read the disc

Check the disc is not loaded upside down.

Check that the disc is not scratched or dirty.

There is no sound

Ensure that the amplier is congured correctly.

Check that the interconnects are inserted correctly.

The disc is skipping

Check that the disc is not scratched or dirty.

Ensure the player is on a rm surface and not subject to vibrations.

There is a hum coming from the speaker

Ensure that all cable connections are secure.

If USB playback, set the USB Ground Lift Switch to “Lift”.

The remote handset will not function

Check that the batteries have not expired.

Ensure that nothing is blocking the remote sensor.

Troubleshooting

Operating instructions cont.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Azur 851C Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Azur 851C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info