Bedienungsanleitung Cambridge Audio AZUR 851D (Seite 14 von 16) (Englisch)

656745

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

TroubleshootingCustom installation (C.I.) use

The 851D features a Control Bus input/output that allow un-modulated

remote control commands (positive logic, TTL level) to be received

electrically by the unit and looped to another unit if desired. These

control commands are typically generated by custom installation (multi-

room) systems or remote IR receiver systems. The Control Bus sockets

are colour-coded orange.

An IR Emitter Input is also provided that allows modulated IR remote

control commands to be received electrically by the unit. Commands on

this input operate the unit only and are not looped out demodulated on

the Control Bus Output.

An RS232C port is also featured which allows the 851D to be controlled

by C.I. systems.

In addition the units feature 'direct' IR/Control codes as well as toggle

codes for some of their features to simplify programming custom

installation systems. Special direct On/Off and Mute commands can be

accessed on the supplied remote control for teaching into C.I. systems

as follows:

1. Press and hold the Standby/On button. The remote rst generates

it's standby (toggle) command. Keep the button held down, after 12

seconds an amplier “On” command will be generated. If the button

is kept held down for a further 12 seconds, an amplier player “Off”

command is generated.

2. Press and hold the Mute button. The remote rst generates it's mute

(toggle) command. Keep the button held down, after 12 seconds a

“Mute on” command will be generated. If the button is kept held down

for a further 12 seconds, a “Mute off” command is generated.

A full code table and RS232 protocol for this product is available on the

Cambridge Audio website: www.cambridge-audio.com

The 851D is a complex product but even so, should things seem not

quite right, the answer is very often a simple one.

There is no power

Ensure the AC power cord is connected securely.

Ensure the plug is fully inserted into the wall socket and is switched on.

Check fuse in the mains plug or adaptor.

There is no sound

Ensure that the unit is congured correctly.

Check that the interconnects are inserted correctly.

There is a hum coming from the speaker

Ensure that all cable connections are secure.

If USB playback, set the USB Ground Lift Switch to “Lift”.

The remote handset will not function

Check that the batteries have not expired.

Ensure that nothing is blocking the remote sensor.

For more frequently asked questions (FAQ’s), technical advice and

information on getting the most out of your 851D, please visit the

Support section on Cambridge Audio’s website:

www.cambridgeaudio.com/support.php

For all servicing, in or out of warranty, please contact your dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio AZUR 851D Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio AZUR 851D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info